Your cart is empty.
Your cart is empty.Product Description
Why You Need Folding Brackets？
Collapsible Wall Table
Maximize small spaces with a wall-mounted table that folds down when not in use, saving valuable room in tight areas.
Countertop Extension
Ideal for extending your RV or kitchen countertop, or adding extra workspace to an existing desk.
Folding Workbench
Expand your work surface for projects without the hassle of extra legs, and fold it away when not needed.
Shelf for Grill
Enhance your BBQ experience with a shelf that folds down for easy storage when grilling season ends.
Easy to Fold and Unfold
Hear a click indicates that it is securely latched when you pull it up.
Extends to a 90-degree angle, ensuring your board is perfectly level.
Folds flat against the wall without any obstruction.
Easy to Install
Includes detailed instructions and all necessary hardware.
Consider using an extended drill bit for easier installation.
Attach the long arm to the shelf and the short arm to the wall.
Extended Release Handle
No need to bend down or reach far back—easily push the release with minimal effort.
High-Quality Washer
Remains stable when fully extended, and operates smoothly and quietly during collapse and retraction.
Heavy-Duty Structure
Constructed from stainless steel with a stable triangular design for enhanced durability.
Safety Design
Curved edges prevent hand injuries during the folding and unfolding process.
Carmenetta
Reviewed in the United States on March 6, 2025
Very sturdy and well constructed
Melvin
Reviewed in the United States on March 15, 2025
Easy to install, perfect for reduced space
Harris Les Myers
Reviewed in the United States on January 25, 2025
Good application for extended cover in our laundry room.
RKBGAP
Reviewed in the United States on March 6, 2024
I bought the 20". Ordered these to make a potting table. These are functional and will probably do the job. Why 3 stars? The picture shows the release lever close to the end of the bracket. I think that's important so you don't have to reach back and feel for the release. The release on these is a good 4-5 inches back from the end. Not a huge deal but that's not what I wanted. So, if that's important to you, buy something else. Also, these are not that sturdy once you install them. I meticulously measured everything before screwing them in tight. They must be perfectly vertical, parallel and perfectly level so they will function properly. Once brackets were in place, I screwed the 3/4" plywood onto the brackets. Plywood was 48"X21". I tightened the screws very tight and evidently bent the brackets right by the middle screw and the brackets would not close but about halfway down. Took me awhile to figure out why but finally noticed the brackets were bowed. I had to take a rubber mallet and carefully bend them back to straight in order for them to close all the way. Even now they only close to about 90% closed. I did tighten the screws pretty tight but only as tight as I could tighten with a screwdriver. Did not use a power tool. I was surprised they could be bowed that easily so if you buy these be aware of that. All that being said, they are pretty decent brackets and I'm going to keep them just because I don't want to disassemble the whole thing and return. They are working but they are not as sturdy as I thought they'd be. If I were to do it again, I'd buy something sturdier.
Colorado
Reviewed in the United States on October 27, 2024
Easy up and down - sturdy and well made.
buckeye1959
Reviewed in the United States on April 23, 2024
I purchased these folding stainless steel shelf brackets to construct a shelf for a 4 gallon water storage tank for a reverse osmosis system that is mounted on a masonry block wall in my basement. The stainless steel is thicker and much nicer than I expected. Looks like high quality.The shelf is secured to the wall with four Tapcon concrete screws and is rock solid. It easily supports the water tank, which weighs 40 lbs when full.Nice product that I highly recommend.
A. B.
Reviewed in the United States on October 27, 2022
I wanted a kitchen cart of a particular size with a dropleaf but couldn't find anything that was exactly right. So when I saw these brackets, I decided to try to make my own. The pix are of the not-quite completed cart (apologies for the messy garage in the background), but you can see that the brackets worked quite well in constructing the dropleaf and everything lines up perfectly whether the dropleaf is up or down.The brackets operate smoothly, and stay put when the dropleaf is up.I next plan to order the longer (24-inch) LuckIn brackets to make a simple foid-down desk top.
James Robertson
Reviewed in Canada on April 20, 2022
Using at the end of an overland slide out system to hold a two burner stove. When I stow it, it will be in shelf mode (L shape). There is a tiny bit of play in the joints, So I may just strap it so it’s not jiggling around in there. Very strong construction, should be great for this project.
Falcmanb
Reviewed in the United States on January 30, 2021
The media could not be loaded.
Recommended Products
$39.99
$ 19 .99 $19.99