Your cart is empty.
Your cart is empty.Product Description
JEREPET 4800GPH Aquarium DC36V Water Pump with Controller, 105W Submersible and Inline Return Pump ,Freshwater and Marine Water Use,25FT Max Lift
JEREPET 4800GPH Aquarium DC36V Water Pump with Controller, 105W Submersible and Inline Return Pump for Fish Tank,Fountains,Sump,Hydroponic,Pond,Freshwater and Marine Water Use,25FT Max Lift.
Pump Feature:
●With high performance innovative motor, energy saving up to 65%, seal impeller,super quiet operation.
●SINE Wave Tech Control, IC electronic detection, automatic power-off protection upon no water or pump blocked.
● No-copper element.
● Suitable for both marine and fresh water, rust free,can be used as submersible water pump & in-line pump.
● With anti-resistant ceramic shaft, longer operation life.
Connect the power cord and the pump cord to the controller(refer the photo of connection). Turn on the pump by connecting to the power;
Cord Length:
The cord length from pump to controller is 6 FT, the cord length for power supply is 10ft;
Easy Installation and clean:
Unscrew the 4 screws and remove the pump chamber , pull the rotor out and use a brush to clean;
Fe2Q3 maget rotor with anti-corrosion ceramic shaft,seal impeller , very quiet operation;
Pump Controller
External Controller:
●SINE Wave external control technology,adjust the flow rate and head max.
● “Feed” Mode, Pause .
● Memory function.
There are 12 speeds for this controller,the adjustable flow rate from 30% to 100%;
press the + or - to up or down the speed;
You can pause the pump by press the Mode and press again to ON the pump;
This aquarium dc pump have FEED mode function,press the FEED button to enter the FEED Mode
,FEED light on and the pump will be in FEED mode ,and the pump come back automatically after 10 minutes,
you can also press the FEED button again cancel the FEED mode.