Your cart is empty.
Your cart is empty. Specification:
DS5160SSG is new launched products in 2019.It continue keeping high quality as previous models, such as: CNC aluminium middle Shell for better heat dissipation, two ball bearings on the output shaft for reduced friction.Light weight,high-speed big torque, water-resistant,sensitive,responsive,low noise and so on.
Its’ Stainless Steel Gear which offer faster speed and accuracy and longer service life.It also has plently of power,super strong and stable, will help you to control your model better.
Feature:
- High-precision metal gear.
- Durable SS Metal Gear
- Double Ball Bearing
- Programmable Digital Amplifier with Mosft Drive
- Bottom Side Axial Mount Hole
- Orientation Angle: maximum 270deg
- Mechanical Angle:360deg (Plug/Output wheel/Radio control system compatible with Futaba JR Hitec)
Speed:
▶0.17sec/60 degree @6V
▶0.15sec/60 degree @7.4V
▶0.13sec/60 degree @8.4V
Torque:
▶58kg.cm.@6V
▶65kg.cm.@7.4V
▶70kg.cm.@8.4V
Operating Voltage:6V-8.4V
Connector wire length:17.7in (450mm)
Gear ratio:279
Pulse width range: 500～2500μsec
Dead band width Microseconds
Waterproof performance:IP67
Package:
-1 pcs Digital Metal Robotic Servo
-A set of accessories: Long Holder Aluminum, Short Holder Aluminum, Circle Holder-18T, Circle Holder and screws (As shown in the picture)
More Options:
✔Only $27.99 Pack of 2 20KG Servos, Please Search ASIN: B07TKTQ2NZ
✔Only $35.99 Pack of 2 25KG Servos, Please Search ASIN: B0C69KY39C
✔Only $52.89 Pack of 2 35KG Servos, Please Search ASIN: B0C69KF77Q
✔35KG Coreless Digital Servo, Please Search ASIN: B07SWST8D6 or B07SWW9NDR
✔45KG Coreless Digital Servo, Please Search ASIN: B0C69BXL6V or B0CCPDYBDQ
✔35KG 7.4V Digital Servo, Please Search ASIN: B0CDQ95Q49 or B0CCPHT83N
✔Robot Servo with Brackets, Please Search ASIN: B0C69NNP9P
CALANDRE
Reviewed in France on September 3, 2024
Pas encore utilisé mais bonne impression générale de solidité. Fonctionne très bien avec une radio commande chinoise bas coût. Bien sûr il faut m'ignorer les 60kg/cm de couple si on veut conserver en bon état ce servo.
Luis M Velasco
Reviewed in the United States on June 22, 2024
Great
Mr. J. Adlington
Reviewed in the United Kingdom on February 9, 2023
This does seem very strong. I haven't fully tested the torque but I got at least 20 kg•cm although it didn't quite get in to the final position.It does indeed go to 270° so if you use the standard commands on an Arduino, 0° to 180° actually gives you 0° to 270° (or close to as the Arduino commands don't cover 500 µs to 2500 µs by default).It's supposed to work from 6 V to 8.4 V but I've had it move as low as 3.5 V.It's difficult to backdrive too which is what I want for my robots so I'm really pleased with it.
Hank Hill
Reviewed in the United States on November 12, 2023
Bought this one after one I had broke after to runs on my HPI 5th scale bought this one that was cheaper and is still going strong couple months now i rc on a dirt bike track so this thing is sailing in the air have the day
Olivier
Reviewed in Canada on October 16, 2023
Great servo, work well. I found that you can over-voltage it without consequences as of now ( 25 hours at 11.1 volt ). you can also remove the control board for continuous rotation easily. 5/5
J. A. Sagarese
Reviewed in the United States on March 2, 2022
Will have to wait a while before the water-resistance can be evaluated, as all is frozen in New York State......
Adrian Hansen
Reviewed in the United States on July 31, 2021
I only gave this 3 stars, as I am not able to use it for the reason of purchase. I purchased this product for a "market known 1/10 scale RC" and when it came in, I immediately noticed that the shear size of it makes incompatible with "Market known 1/10 scale RC's". So because of this I have it set aside for later testing when I have the time and come up with something else that would need a servo of this's physical dimensions. Back to the drawing board for me for a servo of this capability and it's physical dimension are capable to use with "market known 1/10 scale rc".Will update later, when actual use has been tested.
Anonymous Customer
Reviewed in the United States on March 17, 2020
I am giving 3 stars because from our tests show that the actual capacity of this servo is FAR OFF from the advertised 60Kg.cm We used TWO of these on a 6 lb (lets say 3kg max) mechanism that extends 20cms (weight evenly distributed across the span, not only at 20cm mark) from the pivot point, so the actual torque on each of the servo is far less than 60 kgcm, even then, the two synchronous servos require spring assist to properly lift the thing. Our voltage supply is the max 8.4V, stepped down from a 12V 2A limit current powersupply. If these servos are 20 bucks each, I will be ok with it, but considering two of these cost me about $100 and this is the performance I get, I am totally not happy. I am a student on a robotics team, and every coin in the budget is important. I will follow up with pictures so everyone can see.
Angel
Reviewed in Spain on November 15, 2020
Compre este servo junto con otro de la marca Vbest lite para arreglar unos RC de tamaño 1:5, por desgracia no es compatible con el hueco por ser de líneas rectas en los extremos en vez de tener cierta ondulación.Es un servo muy bueno, con mecanismo de metal, supuestamente tiene una fuerza de 60 kg y un ángulo de giro de 270 grados, viene equipado con infinidad de accesorios (soporte de aluminio, soporte de plástico, soporte de plástico en cruz, soporte de plástico redondo y 4 adaptadores de goma).Comparándolo con el de Vbest lite este declara menor fuerza (-10 kg) pero tiene mas ángulo de giro (+90 grados).Adjunto fotos donde se ven ambos, el tamaño es similar pero lo curioso es que este es más bajo que el Vbest lite pero más alto desde el punto de anclaje hasta la rueda de dientes.En cuanto al sonido me gusta más el que hace este servo.
karl Simard
Reviewed in Canada on October 21, 2020
Super et puissant
M. Harrison
Reviewed in the United States on September 2, 2019
Lot's of power, and lighter than many servos with similar power ratings. Rated for 8.4V, but I ran it direct at 11.1V successfully.
TORKYjacob
Reviewed in the United States on May 3, 2019
SERVO IS FOR 55 MPH BOAT. PLENTY OF TORK FOR FORCES RUDDER MUST GO THROUGH TO KEEP BOAT SAFELY ON TRACK. USE HIGH VOLTAGE RECEIVER AND SERVO POWERED BY 6 VOLT BATTERY.
Brian Brown
Reviewed in the United States on December 27, 2019
Wow what power from an affordable servo I got two of these power houses . Best servos I own . An have an plenty outher name brands . I’ll only get these for now on !!!
Recommended Products
