Your cart is empty.
Your cart is empty.Product Description
Since our products are made directly from the manufacturer. While ensuring product quality.
Product Preview
Package List:
- 1 Pack of AMI PARTS W10131825 Oven Temperature Sensor
ABOUT OUR PRODUCT
AMI PARTS W10131825 Oven Temperature Sensor
- Part number: W10131825 Oven temperature Sensor
- Compatible brands: Whirlpool ,Maytag, KitchenAid.
- Possible Repair Solution For: No heat, not enough heat, little heat, not heating evenly, will not start.
Product fine craftsmanship
Our product process is based on the original size measurement and testing. The precision and quality of products can reach the highest standards. At the same time, our production process is strictly in accordance with the original production process, has reached the best quality.
Product detailed parameters
Package Dimensions: 4.5 x 4.2 x 0.8 inches
Item Weight: 1.58 ounces
The product number is : W10131825
Quality Certification
Replacement parts are precision tested by the manufacturer, use advanced materials, and meet OEM standards.
- Replaces Part: 4455636,1449853,AP6015486,W10131825,PS11748765,WPW10131825VP.
Joe Haus
Reviewed in the United States on June 3, 2025
Works.
pcala47
Reviewed in the United States on January 2, 2025
Only took about 10 minutes to install and works properly
AB
Reviewed in the United States on May 4, 2024
Direct replacement for WPW10131825 (Whirlpool RBS305PRS00)Easy repair: two minutes and oven was back in working order. No issues with screw holes not lining up for my make/model.
Fletcher's Mom
Reviewed in the United States on May 20, 2024
I discovered the holes being much further apart than the original part. I did not get to doing the repair until a few days over one month from purchase. When I tried to return more than thirty days about one week not able to return for refund. Such an obvious defect should not be limited for such a short return policy. I buy many things from Amazon and am wondering why.
Gregg
Reviewed in the United States on June 3, 2023
I had no problem unplugging the factory probe and installing the new one. Still working after over a months use. The bottom hole of the new probe did not align with the oven wall hole, but I seen it not necessary to drill another hole.
Mike G
Reviewed in the United States on December 31, 2023
I ordered this temperature sensor to replace part#WPW10131825 for my KitchenAid Oven Model# kems308sss05. The screw holes on the tab are set wider apart than the original piece so I only could screw in one of the two screws. After testing the part seems to work with only 1 screw installed.
Alan F.
Reviewed in the United States on January 13, 2023
My Whirpool Electric oven started throwing an F3 E2 error and proceeded to burn a batch of muffins. I was dismayed at the thought of buying a new unit but then some Google-Fu led me to try to replace the temperature probe. For my unit it was clearly visible in the top right of the oven against the back oven wall secured by two small phillips head machine screws. Unscrewed the two screws, dropped one, cursed, then pulled gently on the wires to get the harness exposed and just unclipped the old and swapped with the new.I ran the oven for 30 minutes at 350F while keeping a BBQ probe thermometer in the middle rack position location. Temperature was pretty consistently hovering about 15-17 degrees cold/low. For this oven I had to press and hold the BAKE button until it beeped and showed 0 CAL on the display. It allowed me to change the calibration increments by 10 degrees at a time. I went on the lower side and bumped it up by 10 degrees. That brought the actual oven temp right around 345+ range which is close enough for the girls I go out with. You shouldn't expect perfection but anything more than 15 degrees high or low of your set temp should warrant a re-calibration.
Robert S.
Reviewed in the United States on January 3, 2021
Thanksgiving morning my wife puts in the oven. About 30 mins. later, the oven has a long beep and F3 pops on the display indicating the temperature sensor has failed. Well we managed to limp through turning the oven on and off to cook everything. I ordered this sensor hoping that would fix the error. Its a wall mounted whirlpool electric oven, so I had to remove the unit and the back panel to get to the temperature sensor. Popped it out and quickly installed the new one. Presto. Works like a charm and for the price, you can't beat it.
Recommended Products
$16.68
$ 6 .99 $6.99