Your cart is empty.
Your cart is empty.
DC 12V Pulse Counter High Level Trigger Relay Module 0-10KHz Frequency Counter for Motor Speed Hall Sensor
1.
Descriptions:
YL3S-C1.1 is a 0-10KHz Frequency Pulse Counter. It can detect the number of input signal pulses and through calculations to control the different working states of the load.
2.
Features:
1>.Adjust 8 work modes
2>.Pulse signal trigger
3>.Support parameter memory function
4>.Relay switch output
5>.Power reverse connection protection
3.Parameters:
1>.Product Name:YL3S-C1.1 0-10KHz Frequency Pulse Counter Module
2>.Product Number:YL3S-C1.1
3>.Working Voltage: DC 12V
4>.Trigger Type:Button/PNP/High Level Control
5>.Output Type:Relay Switch Output(Not voltage output!)
6>.Load Voltage:AC250V 10A or DC30V 10A
7>.Display: 4Bit Red LED Display Screen
8>.Pulse Frequency:0-10KHz
9>.High Level Pulse:>5V
10>.Low Level Pulse:.Pulse Current:>25mA
12>.Working Temperature range:-20℃~85℃
13>.Working Humidity Range:5%-100%RH
14>.Module Size:63*35*18mm
4.Set Parameter:
1>.Press K1 Button to set parameter value:
1.1>.Press K1 Button at the first time:The first bit will flashing.It is used to adjust the highest bit for the Parameter Value PV1.Then press K2/K3 button to set value for 0~9.
1.2>.Press K1 Button at the second time:The second bit will flashing.It is used to adjust the second bit for the Parameter Value PV1.Then press K2/K3 button to set value for 0~9.
1.3>.Press K1 Button at the third time:The third bit will flashing.It is used to adjust the third bit for the Parameter Value PV1.Then press K2/K3 button to set value for 0~9.
1.4>.Press K1 Button at the fourth time:The fourth bit will flashing.It is used to adjust the lowest bit for the Parameter Value PV1.Then press K2/K3 button to set value for 0~9.
1.5>.Press K1 Button at the fifth time:The first bit will flashing.It is used to adjust the highest bit for the Parameter Value P
