Your cart is empty.
Your cart is empty.Product Description
Compatibility :
- Compatible with 2007 Toyota Tundra
- Compatible with 2008 Toyota Tundra
- Compatible with 2009 Toyota Tundra
- Compatible with 2010 Toyota Tundra
- Compatible with 2011 Toyota Tundra
- Compatible with 2012 Toyota Tundra
- Compatible with 2013 Toyota Tundra
Specification
- AUTO：2 "AUTO"
- Backlight Color : Orange
- Position: Front left driver side
- Pins: 15 pins terminal connector
- Replaces Part Numbers : 84820-0C030
- Fitment Type: Directly plug and play style
- Material: ABS plastic
- Package Content: 1 x power window switch + 1 x removal bar
If the switch does not work:
- Press the left-front switch on the driver's window controller all the way downwards and maintain for 5-8 seconds.
- Please turn the switch all the way upwards and maintain for 5-8 seconds. Then restart the vehicle to complete the match.
Attention:
- Plug in a new switch under full stop condition.
- Clean the dust off the plug and the connector before installing a new switch.
- Following the requirements to make sure window switches are fully functional. Otherwise, the window may have problems moving up and down. The up & down motor drive might even become damaged.
Tips:
- Do NOT spill water on the car door because any water seeping in can lead to internal short circuiting.
- Do NOT put anything in the car window gap. Doing so may cause the window to become stuck, and unable to be lifted up or down. Moreover, the pressure will be transmitted to, and damage the lift motor.
Recommended Products