Your cart is empty.
Your cart is empty.DNZ Product’s Game Reaper Series is a custom made one-piece Scope Mount System machined from a solid block of top-grade billet aluminum. Each mount is designed to fit and align perfectly with your rifle’s receiver. There are no moving parts between your firearm and scope. Game Reaper one-piece mounts are lightweight, rugged, and deliver extreme accuracy.
john
Reviewed in the United States on April 19, 2025
These mounts are manufactured very well and two extremely tight tolerances. It made mounting a scope super easy. Works as intended.
Eric Bartholomew
Reviewed in the United States on December 31, 2024
Got it today 12/31/24 and the screws that mount the rings does not lineup to the holes on the rifle. 93R17 I do not recommend.
groovemachine
Reviewed in the United States on April 4, 2022
Put these on a savage mark 2 .22lr and I am very pleased with fit and finish. I've used game reaper before and they work well and you cant beat the one piece construction.
D. Matheny
Reviewed in the United States on February 12, 2018
I recently picked up one of the new 93R-17 rifles with a built-in rail, thinking I would use standard Weaver rings to mount a Vortex scope.The scope I'm using with the rifle is a Vortex Diamondback HP 3-12x42 , and my first mounting attempt was using Vortex Medium-Height Rings .It was immediately obvious that the medium rings, when combined with the height of the Weaver base, were far too high for my liking - so I came back to Amazon to pick up the low version of the same Vortex rings.Although the height was better with the low rings, it pulled the scope in too close to the rail and created 2 problems:1) The rail prevented the scope from being pushed forward far enough to match the eye relief on the scope2) It looked dumb (in my opinion) with the rail pretty much touching the scope in the front and rearThank goodness that Amazon has such a great return policy!Anyway, after 2 failed attempts I wound up on Amazon again looking for an alternate solution - and that's when I came across this Game Reaper mount. I didn't have any previous experience with the Game Reaper brand, but decided to give it a try based on existing positive reviews.Let me say that this mount rocks!1) It was extremely easy to remove the existing Weaver rail, and this Game Reaper mount installed quickly in it's place with just a drop of blue loctite on each screw.2) The height of the medium mount works perfectly with my Vortex 42mm scope. It's just a hair higher than the low rings, but still at a reasonable height above the barrel. (I included a couple of photos so you can see how it looks without the scope cover.)3) The quality of this mount is excellent - it's on par with mounts I've purchased that cost far more. (Obviously for more expensive rifles/scopes.)4) It looks great!Personally, I'd recommend ditching the Weaver rail if you got a Savage 93R17 that includes one and going straight for this mount in the appropriate height for your scope. If your rifle didn't come with a rail, then that's even more reason to go straight to this mount.On a side note, this .17 HMR Savage is sure a fun rifle. :)
John M.
Reviewed in the United States on December 28, 2017
Easy to mount and boy is it solid! I have bought many different mounts for different setups, but I have a new favorite. This fits my Savage 93R17 like a glove and has not budged at all since it has been on. I would recommend this brand to anyone looking for a solid and economical mount for their optic.
Noel
Reviewed in the United States on March 22, 2016
This mount is total quality! I know because I dropped my new 93RBTLSS while trying to get a bore snake through the barrel...(another story). I mounted a Simmons Protarget 3X12 on my new rifle last week and went to the range and shot sub MOA groups from 50 to 100 yards. First of all I need to say the 93R17 is crazy accurate. I covered a nickel at 100 yards. Sweet shooter. After an unfortunate HARD thump to the combo I felt I had to go back to the range to make sure zero was still zero. To my astonishment it was still there!! This is the most solid mount I have ever used. Can I give 3 thumbs up for this mount? It mounted perfectly and took some punishment. If you are looking for a quality mount this is it. Leupold, Nikon or whatever you want to use this mount is the BEST.
eawick
Reviewed in the United States on April 23, 2014
Mount fits absolutely perfectly to my Savage Mark II .22LR. Nice and solid and keeps my Simmons 3-9x32 w/AO rimfire scope close to the bore, yet still clears the rear iron sight.I find it pricey, though... hence the four stars.
Larry L. Shank
Reviewed in the United States on June 18, 2011
Much better product than I expected. I have accumulated many scope rings and mounts in my 50+ years involved with shooting sports. While I'm not a fan of aluminum threaded rings, these are decent threads with a lot of thread contact. The holes in the mount lined up perfectly with the holes in the rifle's receiver. The ring alignment was outstanding as checked with my Kokopelli (the best) ring alignment bars... no lapping needed, as advertised. Very sturdy and attractive product.
Recommended Products
$8.95
$ 3 .99 $3.99