Your cart is empty.
Your cart is empty.Goodman Parts,0131M00002PSP,VENTOR ASSEMBLY
javier martinez
Reviewed in the United States on January 23, 2025
Perfect fit. Perfect match. Highly recommended.
Fredy
Reviewed in the United States on January 10, 2025
Came in good time, is same as original comes with a gasket. Bought as a spare part so won’t know if it works unless original goes out, hope I never find out.
Thomas Bailey
Reviewed in the United States on March 19, 2024
Easy removal and install. Way quieter than my old one. I would recommend.
Customer
Reviewed in the United States on February 11, 2024
Draft inducer motor arrived quickly. Perfect fit replacement for the older style motor which died on me during a freeze. Much quieter than the old one too. I'm very happy with this. Only issue was keeping my hands and breathing away from the fiberglass insulation during installation. It didn't come with any screws but I was able to use the old ones.
T.N.
Reviewed in the United States on January 27, 2024
12 years old blower been rattling during start up and shut down (pic on right). removal and installation was straight forward (new on left). made sure not to swap the wires and connected the terminals just like they were on the original. wore gloves when seating the fiber glass gasket. 4/5 stars rating because the blower flanges were bowed and needed flattening out to ensure proper seating against the fiber glass gasket.new blower is as quiet as expected.
Floyd B.
Reviewed in the United States on January 22, 2024
If you are capable of turning of the furnace (usually a switch near the furnace), this replacement required 7 screws to be removed, and a rubber hose to be plugged in.My "furnace maintenance" company wanted $1000 to replace this little fan. It took me about 15-20 minutes to change it out.
bgboettch
Reviewed in the United States on December 20, 2023
The unit that came with the original installation of my furnace had the fan bearing freeze. This replacement was an exact fit. Remove the bolts holding the unit to the furnace, swap unit with new, replace bolts...it's that easy. Working fine. Noticeably quieter than the unit replaced.
S. Brewer
Reviewed in the United States on October 12, 2019
My furnace works again! MUCH quieter than the unit it replaced, which had rusted to bits. Comes with the fiberglass gasket, but no screws and it does not come with the square-to-round chimney adapter that you will likely need, unless you are able to get it off of your old blower. Mine was rusted and cracked so a new one was in order. If you need this part for yours, search for 4053501S (that's the part number).
Recommended Products
