Your cart is empty.
Your cart is empty.Product Description
This item is 36345 THREADER, 00R 1/2-1 NPT
From the Manufacturer
Since 1923, ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the ridgid brand is engineered to the same high standards of quality, strength and endurance as was that first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The ridgid 36345 is an exposed ratchet threader set with a capacity of 1/2-Inch to 1-Inch. The set includes die heads, ratchet assembly, ratchet handle and alloy dies. Uses 12-R dies in die head
matt
Reviewed in Canada on May 1, 2025
Doesn't come with case, but that was probably an oversight on my part. Haven't used yet but ridgid tools are typically good quality so no issues anticipated
NormH
Reviewed in the United States on September 4, 2024
Ridgid quality is not what it was from years ago. I used 1/2" and 3/4" pipe thread cutting dies and was not pleased with the results. Threads were in many places were not clean and broken off. Instructions did not mention reversing while cutting and clean out chips. I tried cutting without reversing, reversing and stopping to add lots of cutting oil. It was hit and miss to get cleanly cut threads.
Michael Kazanjian
Reviewed in the United States on December 21, 2023
Used is extensively. Works well .
José Paredes
Reviewed in Mexico on May 2, 2021
Lo use para darRosca a tubo galvanizado de 3/4 . Funcionó perfectamente , es una herramienta sólida y precisa
Tom & Emily
Reviewed in the United States on January 10, 2020
I have used the 1/2 and three/4 threaders multiple times with zero problems. I purchased this set to complete a natural gas heater install in my garage. I don’t know exactly how many pipes I threaded, I would guess I probably did 20 three/4 and 10 1/2 with no problems at all. I used plenty of cutting oil and slow even pressure. My only suggestion to anyone planning to purchase this set is to make sure you have a good pipe vice.
Manuel
Reviewed in Mexico on July 14, 2019
Buen producto, buena calidad
Dallas Klippenstein
Reviewed in Canada on December 16, 2019
Quality as expected from Ridgid. Just used for hobby so should last forever
David
Reviewed in Mexico on December 14, 2019
Solo tuve unos pocos cortes que yo necesitaba hacer por eso yo compre un juego de tarrajas de la marca Truper. Fue un gran error porque no pude cortar ni siquiera una cuerda en tubo de acero galvanizado de 1 pulgada . Por eso yo compre el juego igual de Ridgid y que diferencia! Utiizando el aceite especial para cortar es como cortando a traves de mantequilla con un cuchillo caliente. Obviamente la diferencia metalurgicamente hablando entre Truper y Ridgid es como la diferencia entre dia y noche.
William I.
Reviewed in the United States on February 21, 2017
I was setting up a new shop with air lines so I needed a pipe threader. I tried a HF unit and it broke after 6 threads. So having another 90+ threads to go I got this set. I should have got this set right off the bat. Works flawlessly and the die (1/2") still feels and cuts like new. Never used the 2 larger dies in the set but I would imagine they work as well as the 1/2". This is high quality pro-grade stuff and highly recommend.
timothy stengel
Reviewed in the United States on December 17, 2017
I purchased an inexpensive set of pipe threaders from Harbor Freight that were absolute garbage. This Rigid set is pricey but when it comes to tools you get what you pay for. The rigid threaders are professional grade and work awesome. Money well spent
Joseph Bender
Reviewed in the United States on January 27, 2014
Per the instructions, only thread to the end of the steal die.Your total thread length will be 1/8 inch less than a typical pre-threaded nipple, but still more than adequate.I used plenty of cutting oil, but still had occasional problems with thread tearout.Could not determine if reversing the die to break the chips was helpful, or a waste of time.I suspect it is the quality of the Chinese pipe steel alloys, or the diameter of the pipe.Try to use U.S. made pipe.
Tool man K.
Reviewed in the United States on January 12, 2014
Awesome quality. Premium price though. Looked at the much less expensive brands and noticed people said you have to nurse the die cutting along. Not with Rigid, keep some cutting oil on the threads and cut as fast as you like. You know what you are getting when it says Rigid. Tools for life.
Brenda B.
Reviewed in the United States on April 13, 2014
Needed a tool to thread gas pipe while on a job that was remote. This worked perfect didn't use the 1/2" die but the 3/4 and 1" dies worked excellent, cut around 20 of each size. the more oil you use the better the 1" takes some muscle but cuts perfect threads. Made in U.S as well and is totally different quality then the foreign dies and handle I saw at a local home improvement store.
Recommended Products
$51.97
$ 27 .99 $27.99