Your cart is empty.
Your cart is empty.Customer
Reviewed in the United States on June 12, 2025
Concept looks great but in reality it didn't work well. The cups leaked where they screw into the PVC pipe. Tried it a second time and it did the same thing. After contacting Rentacoop got no real help so I fixed it with clear silicone. Then when I hooked up the water supply the float valve didn't shut it off and it overflowed. Not happy with the whole setup. I'm having to fill the tank by hand which defeats the purpose of an automatic waterer.
Kaylee A.
Reviewed in the United States on May 31, 2025
I attached it to a rain barrel to make an off grid watering system for the chickens.
L. L.
Reviewed in the United States on May 27, 2025
It's a little pricey an cheat made. But it's working good so far.
Farmer G
Reviewed in the United States on May 12, 2025
We own and use several poultry items from RentACoop, but this isn't one of their best designs. The construction of this setup is challenging at best. The shut-off valve is the first real issue, as it rubs the side of the float valve housing and is difficult to turn. The vertical nipples are fine, but the water cups are worthless to us as all of our birds turn them into mud holders, and they get nasty. Overall, the concept is okay, but we have seen and used better options out there for auto watering systems for poultry.
BWW
Reviewed in the United States on February 10, 2025
The shutoff valve lever doesn’t clear the sidewall of the container. Some of the rubber seals are also sized incorrectly and are too big. Fairly common issues for Rent A Coop. Good ideas, things just don’t ever fit just right.There is actually a great video tutorial on this product. And I noticed when that gentleman shut his valve off he had to force it into place which likely pushed in the sidewall of his container.
slorockstar
Reviewed in the United States on April 26, 2025
The media could not be loaded.
burt barber
Reviewed in the United States on June 13, 2024
The media could not be loaded.
Lindsay
Reviewed in the United States on November 20, 2024
The hole saw needed for the shut off valve in your own barrel uses a 35mm hole saw (not 28mm as it says in product description). We were unable to cut a larger one cleanly after using the wrong smaller size, so had to purchase a new barrel.It took a few tries to drill holes in the pvc pipe without the bit taking off too much. Finally learned we needed to keep the pipe warm, using a blow dryer right before helped. Also used masking tape where drilling holes I think to keep drill from walking.Once finally done, system worked great, no leaking. We used a couple more elbow pieces than came in the kit, and it was easy to order them separately.
Recommended Products