Your cart is empty.
Your cart is empty.Product Description
Shars Tool 3" 90 degree Face Mill with APKT Insert
Benefit from the 90-degree lead angle allows efficient square shoulder milling and the ability to machine workpieces with weak structures or thin walls over a 45-degree face mill. It uses an industry-standard APKT/APMT 1604 insert with a positive 11-degree clearance angle and depth of cut of 0.551" or 14mm. The insert pockets are designed to be 19 degrees positively inclined to minimize vibration and allow fast cutting and lowering cutting noise.
- Fitted with 10-degree positive rectangular inserts allow the high depth of cut and feed per tooth
- Setting Angle: 90 degree
- Radial rake angle: -10 degree
- Axial rake angle: +7 degree
Product Included
- Insert screw, wrench
- 1 PCS of 3" Indexable Face Mill (SKU#404-1869W)
- 10 PCS of APKT1604 Carbide Inserts (SKU#404-6541)
- Only compatible with ZCC USA and Shars Tool APKT inserts
Technical Specs
- Part# 404-1869W
- Cutting Diameter D: 3"
- Axial Depth of Cut ap: 0.63"
- Arbor Hole Diameter d: 1"
- Overall Height H: 2"
- Insert: APKT1604
- Number of Flutes 7
- Screw: M4x10
Product Spotlight
- An easy reference guide for insert number, screw, and other accessories is printed on the tool
- Can be used with APKT / APHT / APET / APMT 1604 insert (Sold separately)
Shars Tool APKT 33 1604 PM YBG202 Carbide Insert 10 PCS Set
- Part# 404-6541
- To be used on: Alloy Steel, Stainless Steel
- Application: Semi-Finish
- ANSI Number: APKT33PDER-PM
- ISO Number: APKT160408PM
- Coating: PVD Nc-TiAlN
Insert Measurement
- Length: 0.704"; Width: 0.367"
- Thickness: 0.227"; Through Hole: 0.173
- Corner Radius: 1/32"
- Suitable for most face-milling applications
- Reduces vibration on long overhang applications
- Chip thinning effect allows for increased table feeds
- High Positive cutting geometry
$138.95
$ 68 .99 $68.99
$166.66
$ 77 .99 $77.99