Your cart is empty.
Your cart is empty.Product Description
Specification:
Color:Silver
Size:AN-6
Inner diameter(ID):8.73 mm 0.343inch
Outside diameter(OD):13.89 mm 0.547inch
Inner hose Materail:CPE material hose
Outside Materail:Stainless Steel
Working Temperature:-40F to 248F (-40¡ãC to + 120¡ãC) under most operating conditions.
Working Pressure:1015 PSI
Burst pressure: 6090 PSI
Package Includes:
25Ft Stainless Steel Braided Fuel Hose
How to Cut
For cutting your new steel braided hose to length you will need:
* Cutting wheel/ hack saw/ or steel braided hose cutters
* Duct tape or electrical tape (work best)
1.Measure your hose and find desired length.
2.Tape hose at measured length needed for application.
3.Cut hose threw the tape you have placed.(This keep the steel braid from fraying)
4.Remove the tape.
5.Slide one end of hose into end of fitting.
6.Insert the other half of fitting into the hose and begin to push and screw the fitting together.
7.Make sure all connection are tight.
Customer
Reviewed in the United States on January 5, 2023
I installed about 10' of this hose in a show (not 4-wheeled) Jeep CJ7 (1979) and with in 18 months, the hose leaked in a section 2 feet from the engine. I replaced that section of hose and now 24 months from initial install, the hose is leaking in another section of the hose. The fuel used in this vehicle was basic pump fuel and not under high fuel injection pressure. If you like your car and want to stay alive, don't buy this product.
Bernard powell
Reviewed in the United States on July 2, 2021
I use this hose for transmission lines hasn't let me down yet
Placeholder
Reviewed in the United States on June 20, 2021
Fixed the trans lines on my truck
The G’s
Reviewed in the United States on February 11, 2021
When the hose is cut the steel braid opens up like a mushroom. Makes it a bit difficult to install. Overall good product.
Don Spencer
Reviewed in the United States on October 6, 2021
Glad I found you. Thank you
Michael Gideons
Reviewed in the United States on October 10, 2020
I put this line side-by-side with the stuff from Summit. Yeah, this stuff is a LOT less expensive. But it is a LOT more rigid too. Luckily, I decided to use bulkhead fittings so i don't have to make sharp bends with this stuff. Also, the braid looks a lot less "stainless" than the braid of the Summit stuff. It's only a visual thing as I really don't have a way to test the content of the metal--just an observation. Also, the braid is more difficult to cut than the Summit stuff and wants to frey more easily making it more difficult to install connectors.
Gregory
Reviewed in the United States on September 30, 2018
This cable seems to be able to withstand the test of time. Its strong and stiff just as i expected.
edward long
Reviewed in the United States on October 12, 2018
If you have never used braided hose then watch a YouTube video first. Its not easy to work with but its the way they all are.
Recommended Products