Shopping Cart

Your cart is empty.

Your cart is empty.

3/8'' Marine Fuel Hose Feed Line Rubber Type A1-15 / SAE J1527 Standards Fits for Ships and Marine Equipment (3/8 inch 10ft)

Free shipping on orders over $29.99

$23.99

$ 12 .99 $12.99

In Stock

1.Size:3/8 Inch 10ft


About this item

  • Universal Fuel Hose for boats, marine or any other sea equipment
  • Inside diameter length:3/8"(9.5mm).Outer diameter length:17mm.Min bending radius:80mm
  • Made of NBR inner, NBR+PVC outer, reinforced with polyester fiber braid
  • Working Pressure: 300PSI.Burst Pressure:900PSI.Temperature range:-20°F to 221°F(-30°C to 105°C)
  • Compatible with gasoline,diesel and E85,etc.Widely used for supplying fuel to motors in boats or marine


Universal Fuel Hose for boats, marine or any other sea equipment


KGM
Reviewed in the United States on June 5, 2025
This 25-foot fuel hose is a well-constructed fuel line. It features clear "Marine Grade" markings printed continuously along the hose, which is a crucial indicator of its quality and intended use. I also verified that the hose's sidewall is of sufficient thickness, confirming it is indeed a USCG approved fuel line. Its construction is sturdy, and I found it to be easy to install.
David
Reviewed in the United States on May 9, 2025
Basic fuel hose. Good for replacing old dry hard fuel line.
CarCW
Reviewed in the United States on May 8, 2025
Good quality and length of fuel hose. Sturdy, exactly as described, and an appropriate pliability for it's thickness. Just what I needed to finish a repair.
Cole
Reviewed in the United States on May 7, 2025
I'm preparing my boat for the summer season, and my first ride of the season spelled fuel supply issues, namely my fuel hose, so I ordered this replacement hose. My old hose had a liner in it that ended up separating from the hose and collapsing like a squeezed plastic straw (which starves the engine of fuel).This particular hose from LSZDWORK does NOT have a liner inside, which is what I was looking for. It's fiber reinforced and meets all the dimensions advertised. I have no concerns at all with using this product.
JohnnyB
Reviewed in the United States on May 13, 2025
This "3/8'' Marine Fuel Hose Feed Line Rubber Type A1-15 / SAE J1527 - 25ft" came in a simple package. The hose looks and feels like decent quality. The length is right at the advertised 25 ft. and the inner diameter fits 3/8" fittings the same as the other brands I use from local parts stores. It is slightly more pliable than some of the standard fuel hose I use, but not to the point that it concerns me. I'll be using this on carbureted applications only (3-12 psi), so can't comment on the advertised 300 psi. working pressure. No complaints so far, will update if it fails prematurely.
Heather
Reviewed in the United States on May 12, 2025
My husband used this to replace the fuel line on our 2004 Kawasaki Vulcan 1500 and it worked perfectly. Good to have the rest on hand for other projects or needs. No issues with quality or durability so far.
Sarah W.
Reviewed in the United States on May 11, 2025
Nice fuel line. All required markings clearly visible.
Customer
Reviewed in the United States on May 1, 2025
Recently I had to replace the fuel line on my wood chipper and of course I didn't have enough on hand, which set me back a day while waiting on replacement line to arrive. Since then I've learned the importance of keeping essential supplies in my workshop, ready to go.These fuel lines take a beating from the sun and from the gas itself and deteriorate over time and they are guaranteed to crack and leak and fail to suck in fuel at the most inconvenient time. So do yourself a favor and replace them every couple of years and always keep a spare roll of them around.