Shopping Cart

Your cart is empty.

Your cart is empty.

Air Box Intake Plug Hose Cap For Honda 3.5L V6 Ridgeline 2017-2025 Odyssey 2018-2024 Pilot 2016-2022 Passport 2019-2025 Sound Upgrade

Free shipping on orders over $29.99

$13.99

$ 6 .99 $6.99

In Stock

About this item

  • Intake hose plug, vehicle specific fit
  • To improve driving experience, increases intake noise
  • Simply slips a plug into the lower port to bypass, maintaining factory function and appearance
  • No modifications and trimming required
  • For Honda Ridgeline, Odyssey, Pilot, Passport 3.5L V6 2016-2025


Type: Intake Hose Plug
Replacement Type: Custom Fit
Position: Front, Under the Hood, Driver Side
Material: ABS Plastic

Installation:
1. Remove air box upper plastic cover.
2. Remove air intake scoop.
3. Release the housing bolts and remove the upper intake box, air filter.
4. Release the air box housing clips on both sides, separated.
5. Remove the air box body lower rubber seal.
6. Insert the intake hose plug and mounted with seal back in place.
7. Install what you have removed.

Fitment:
2024-2025 For Honda Ridgeline Black Edition, RTL, Sport, TrailSport 3.5L V6
2020-2023 For Honda Ridgeline Black Edition, RTL, RTL-E, Sport 3.5L V6
2017-2019 For Honda Ridgeline Black Edition, RT, RTL, RTL-E, RTL-T, Sport 3.5L V6

2023-2024 For Honda Odyssey EX, EX-L, Elite, Sport, Touring 3.5L V6
2018-2022 For Honda Odyssey EX, EX-L, Elite, LX, Touring 3.5L V6

2020-2022 For Honda Pilot Black Edition, EX, EX-L, Elite, LX, Special Edition, Sport, Touring, TrailSport 3.5L V6
2016-2019 For Honda Pilot EX, EX-L, Elite, LX, Touring 3.5L V6

2024-2025 For Honda Passport Black Edition, EX-L, TrailSport 3.5L V6
2022-2023 For Honda Passport EX-L, Elite, TrailSport 3.5L V6
2019-2021 For Honda Passport EX-L, Elite, Sport, Touring 3.5L V6


Ed.R
Reviewed in the United States on June 1, 2025
After watching a few yt videos that show how an intake plug might change how my intake sounds on my '20 Ridgeline, I decided to try this. Right out of the gate, it didn't seem right. The plug appeared way too small. After some quick measurements, I confirmed it was an inch too small in diameter to fit the lower resonator opening. To be fair, it didn't come with any instructions, so I checked and checked my entire intake for other places it might fit, but I found none. Ultimately, I'm unsure where this would have worked.