Your cart is empty.
Your cart is empty.Product Description
AmeriLite only work with highest tier manufacturer with over 30 years of experience in automotive lighting. Our factory known for their quality, durability and innovation with CAM/CAM design and testing in house using multimillion dollars equipments ranging from photometrics, temperature & humidity to package drop test. Safety is our factory main goal and all of our products are DOT and SAE compliant with annual inspection that exceed FMVSS No 108 / ISO 9002 / QS 9000 requirement.
High power LED provides great visibility both day and night time.
Direct Plug and Play made installation easy.
- Improve Visibility
- Enhance Safety and Vehicle Appearance
- High durability new material with UV coating to protect harmful sun light while provide long lasting light output performance.
- Long Lasting LED Parking Light Bar, LED Turn Signal Light.
- Complete set includes Left (Driver Side) and Right (Passenger Side).
- High Quality Tail Lights made by OEM approved manufactureres with materials that meet or exceed strict OEM requirements.
- Easy install direct Original Equipment Replacement.
Ron Fagan
Reviewed in the United States on March 29, 2025
I ordered two of them. The first one I returned because there was no instruction and could not figure it out. I did more research, ordered a second time, and got them installed. They look good and are functional. The switch back means when the LED bar around the edges and the turn signal are on all white until you use the turn signal, then ONLY the turn signal turns yellow and then Switches back to white when done. The bulbs that come with it are worthless. Had to get two new sets of Sylvania Silverstar Ultra, one low beam and one high beam, $125. LEDs would have been $250. Nice lights over all.
Zach
Reviewed in the United States on April 18, 2025
The media could not be loaded.
Lonnie white
Reviewed in the United States on September 29, 2024
The media could not be loaded.
Wendy
Reviewed in the United States on November 16, 2024
The lights have a hard top border line that is uneven between the two lights. The headlights went out at 9 months. The running lights worked but the low and high beams stopped working. We reached out to the manufacturer and they just told us to check our wiring - which we had done but did again to no improvement. After that it was too bad , so sad. Buy another pair.
Steven Cameron
Reviewed in the United States on November 11, 2024
Was an easy installation
Eric17
Reviewed in the United States on October 20, 2024
Installation is straightforward plug and play. It worked great on my 2014. F150 & made it look and perform better than stock. Good way to upgrade the look of the grill & get a better functional light at the same time.
mikey41
Reviewed in the United States on January 22, 2024
I installed these on my 2011 F150 and love the new look. I wanted to "update" the look of my truck because I have no intentions of buying another truck anytime soon. This did the trick for me. They really were "plug and play" and the installation was straight forward and easy. There is no splicing of wires for power/ground with these which is what I wanted. The LED tube that runs around the outer rim of the light looks great and is bright at night. When the parking and/or head lights are on, the LED tube and turn signal portions of the light are white. Using the turn signal causes the turn signal light to flash amber. I replaced the low beam halogen bulbs that come with these lights with Termitor 2024 Upgraded H7 bulbs that work well. They are an exact match for the halogen bulbs and installed easily. Two observations with these assemblies. The first time I drove at night, the headlight beams appeared to be a little high. There is an adjustment screw that is easily accessible under the hood on the top of the assemblies. They are marked which way to turn for adjusting the beam up or down which is great. The issue I ran into was that when I turned the screw to lower the beam, the screw only turned maybe once and that was it. It would not turn any further so, it was already turned downward as far as it would go and the "adjustment" was negligible. I haven't had any flashing lights from oncoming cars so, hopefully, I'm good. The other observation. The LED tube around the perimeter of the assembly is referred to as a 'LED running light.' I took that to mean 'daytime running light' which it is not. My mistake. The perimeter LED tube does not light and stay on during the daytime when you start your vehicle. No matter. These are very nice lights and have updated the look of my 2011 pickup to appear like more recent trucks. I'm very happy with this product.
Josif jurtsuk
Reviewed in Canada on August 5, 2023
The description for the product led me to believe that the halo is part of the daylight running lights but they are not. They are actually activated only when the night lights are on. The description for product defined the halos as running lights. I think that is deceptive as they only turn on when you turn on the night lights.I love the look of them. They modernize my truck.
Mikhail Shkredov
Reviewed in Canada on May 2, 2023
Very cool. easy installation
Customer
Reviewed in Canada on April 1, 2023
Makes a huge difference, I am actually able to drive in the dark now and see well ahead of my truck! I’m definitely not going back to my halogen headlights!
Matthew Berberian
Reviewed in the United States on February 25, 2021
Got these new headlights for my 2010 f150 xlt chrome.They came well packaged in one large box, with two smaller boxes for each headlight. No issues.Install was a breeze and completely plug and play with the existing harnesses.I upgraded to LEDs from at the same time and I highly recommend you do that at the same time to match the color temperature of the headlight led bar plus it modernized the whole look.To install the LEDs you need to pick up both h1 and h7s. I got both on Amazon from a company "Lasfit" which came out great and fit well. For the H1s you'll need to splice the headlamp ground wire (black) to the led ground (black). The hot wire can push into the headlight connector. For the H7s, they are plug in. Just be sure to match positive to positive. I also had to shave a little plastic from the dust cover with a razor to get it to fit. (No big deal)Once installed, the headlights have an up/down adjustment screw to level them.All in less than an hour to install and a huge upgrade. Car looks better than the newer F150s.
Kyle Dormoriz
Reviewed in Canada on September 27, 2020
I absolutely love the way these look on my truck. I wanted to convert my healiggts over to LED for a while but didn't want to go through the headache or adding shunt resistors or screwing with the wiring.These assemblies are plug and play and you don't get the annoying fast clicking turn signals because they come with shunt resistors installed on the back of the assembly. Simply undo the 2 bolts and pull the old one out. Connect your stock bulb plugs with the new assembly and push into place. Install 2 bolts.We'll see if they hold up over time
Recommended Products