Your cart is empty.
Your cart is empty.Product Description
- Constructed of high quality ABS material for rugged durability.
- Only compatible for comta ii comtac iii headsets, others will not compatible
- Rails of adapter can match with ARC RAIL ,many range of Ops-Core FAST helmets, ACH helmet, MICH helmet,etc,which has arc rail on side.
With a full 360-degree rotative design, save space while no using
With a full 360-degree rotative design, save space while no using
With a full 360-degree rotative design, save space while no using
Install Guide
Installation guide for accessories, as shown in the figure
Easily slides out or into the rails with a gentle lift.
Installation guide for accessories, as shown in the figure.
Application Occasions
Suitable for airsoft training, shooting practice, hunting and other outdoor sports.
Suitable for airsoft training, shooting practice, hunting and other outdoor sports.
Suitable for airsoft training, shooting practice, hunting and other outdoor sports.
Kalvin cortez
Reviewed in the United States on March 8, 2025
False advertised 3d printed garbage. Does NOT fit peltors or any peltor style headset like advertised. Dog crap product do not buy! Waste of $40
Samuel Britt
Reviewed in the United States on March 29, 2025
Worked great with my Peltors.
Warren A. Wilson III
Reviewed in the United States on June 15, 2023
A right pain in the keister to get on, even if you follow the video instructions. They don’t clip into place, but it feels like a detent when the clips go over the holes. Some electrical tape above, and below may hold it into place. I’m worried with all the movement they will fall off the rail. If they do 1 star, as of now because I need to do this fix, 3 stars
Mark R Becht
Reviewed in the United States on September 26, 2022
I bought these as one of the lower cost options for a headset mount. I did that knowing that they would probably fall a little short of the Team Wendy equivalent (sarcasm - look them up)Pro:Fit my Peltor earpro without any issues.Good articulation, adjustability and tension.InexpensiveSeem rugged enough - time will tellCon:Finish quality is somewhat lacking. If you, like me, have no problem spending some quality time with an X-acto knife deburring and cleaning up flash, it's not a major issue.Didn't fit on my rails out of the box. The dovetails were a little big. See above on quality time with sharp things. Better than being too small, because they could be trimmed a bit.All in all, not bad. We'll see how they hold up
Gabe
Reviewed in the United States on February 13, 2022
I bought these because of my non-high cut MSA ACH MICH level3 helmet. I tried using the wire mount but the geometry of the bent wire mount wouldn’t reach. I gave 4 stars because of how sturdy the mount is and the spring tension. Other reviewers say it’s 3d printed junk. First of all it is plastic but injection molded. It’s smooth all he way around. The only flaw is the part that mounts to the actual ear piece. The snap on section, if you don’t align it just right and push it on it will crack. The set does come with an extra pair so I was good with the second try. Contacted the seller about how I used up my first set of attachments as soon as I got it and they’re sending me another set so I will have a good pair set. The tension on the snap on bracket is pretty sturdy. Other reviewers say one little tap and it falls off. Perhaps because they cracked it. Overall very satisfied. I have put them on and off several times testing to make sure nothing got loose. Also banged on them pretty good to simulate a fall and they’re still sturdy.
Paul Cutcliffe
Reviewed in the United States on December 30, 2022
I love the concept. Turning my Peltors into similar setup to OpsCore headsets. It frees up my side rails on my helmet for other applications, which is great. The adjustability on them is fantastic. But, broke the first set getting the headset onto them. Then a week later, the other set broke, in the helmet bag. Snapped at the retaining fingers, and the mic post snapped. A real shame. The quality of the ABS is some of the lowest I’ve ever seen in a product. It only they upped the quality a bit, these would be industry leading, for us Peltor users. These id value at $20
Favorite Customer
Reviewed in the United States on January 22, 2022
Point of attachment to peltors doesn’t secure peltors. A little bump and they fall off. Awesome design poor quality
Mitchell D Dubois
Reviewed in the United States on April 1, 2022
They fit my Howard lights and Walker Razer (and variants that use the same frame like my Tacpack ones) without issue even though they aren't designed for them. However it covers the mics on each to some degree and I have no idea what issues that may cause. But worth the workaround anyways.These apply very nice pressure and were tight in my rail, but with a bit of persuasion... and a hammer and a screw driver to punch the bottom mount, I got it all the way up the rail where I want it. Hope I don't have to remove them 🤣. Either way, they feel VERY secure in my system and Like them a lot even without adjustments done.Only thing I have to do though is to make them more user friendly.. I will have to extend the earpro wires as these definitely will be awkward without it running where I need it too as when pulled away from the head the wire has to either be loose and moving or just never plan to rotate them out and away...neither option is a good idea IMO. I'd rather have my ears protected and don't find that to be an issue as compared to the bent wire versions of headphone adapters... this is FAR superior and I could probably shoot all day like this due to a perfect seating on my head.Overall look built well, but we will see through the test of time and whatever stupid shit my friends and I will get up to.Cost is fair considering the level of engineering it took to create these and the very specific use they have. Definitelydont feel as cheap as another person said and are in fact a sturdy injection mold plastic that appears to have a fiber to increase strength.I'm just happy I don't HAVE to buy new headphones like some people said and I'm writing this for others to know before they destroy their ears with inadequate pressure by inferior systems. Get them now if you are considering options for hearing protection built into your helmet.
Recommended Products