Your cart is empty.
Your cart is empty.Product Description
About Us
Auto Dynasty came about more than a decade ago with only one thing in mind, and that was to provide automotive performance solutions to car enthusiast.
Being car guys ourselves, we understand first-hand on what the community demands and what it thrives on.
Throughout the years, the automotive scenes have been evolving rapidly and so have us.
We have been swiftly adapting to the industry's changes and catering our new products to fit the current market needs.
3D Dual RGB Color Halo LED Turn Signal Projector Headlights
Dramatic Enhance the Appearance of Your Vehicle
Headlight is a lamp attached to the front of a vehicle to light the road ahead. Headlight performance has steadily improved throughout the automobile age, spurred by the great disparity between daytime and nighttime traffic fatalities. Headlights are one of the most important components of your vehicle; they allow you to see the road in front of you clearly during the night and in any bad weather that may arise. Our headlights upgrade the face of your vehicle with clear style and extreme range.
- Dual 3D Crystal Halo
- Projector Low Beam
- Amber LED Turn Signal
- Use H7 Low Beam / H1 High Beam Bulbs
Installation Precautions
Step 1
Open the box and inspect the item. Verify what was received was what you ordered and that the item is free from physical damage or defect.
Step 2
Remove the original headlights. If you are having difficulty there are most likely fasteners hidden. Review the new headlights to help locate the hidden fastener’s locations. Commonly there are two to four fasteners per light. They may be located behind a fender, bumper or grill.
Step 3
Once the headlight is removed transfer any bulbs or wiring harnesses from the original headlights to the new units. Then plug everything in and test all lights are working correctly.
Step 4
Unplug the new headlights. Install them in the reverse order the originals were removed. Plug the new headlights back in. And verify they are working correctly.
Compatible with:
- 09-11 BMW 323i Sedan
- 09-12 BMW 325i 335i 335d Sedan / BMW 328i Sedan/Wagon
Fits Halogen Headlight Models Only
Does NOT fit HID Headlight Model Vehicles;Does NOT fit Vehicles with AFS Adaptive Headlights;Does NOT fit Coupe / Convertible Models
Tony Korosak
Reviewed in Canada on May 13, 2025
Very impressed, it makes my 2010 BMW 328i looks like a new BMW model! Note it took 4 hours to install and program but all worth it. I was going to replace this 2010 with a newer model do to the cloudy headlights, but what a transformation! Seriously, I have random people looking and coming up and asking what year is the car!Bottom line, is upgrade is a positive upgrade to restore or resale this vehicle.CheersTony
Victor Manuel Grecesqui Brioso
Reviewed in the United States on April 14, 2025
They are perfect and very beautiful, excellent quality and light.
Carlos
Reviewed in the United States on August 8, 2024
They work for the 1st week as advertised. They look really nice until they started to fall apart. I think it was plastic seal that came off, blocking the light/brightness. I contacted the seller for a replacement of that one headlight but they said NO, they wanted me to remove both headlights and return them for a full money reimbursement. It's a lot of work to do that and not mention putting old lights back.so they only offered me a $60 compensation. Not even half what a paid for a single headlight. The other light is the same with some water leaking in. I didn't even reach out to them because they made it such a headache for a $60 to begin with.
fischer
Reviewed in the United States on November 4, 2024
sadly they did come with a few scratches but they look good and have a bright halo, i put these on my alpine white bmw 328i LCI. just know these do fit the facelift but you cannot put them on the coupes just the wagons and 4 doors.
Paul Lawrence
Reviewed in the United States on April 7, 2022
I bought the original set of this type when they first came out with silver eye brow about 7 years ago. I installed HID system in them and used a LED bulb for high beams. When the upgrade halos came out, that was brighter, I had to disassemble the headlights to install the upgrade halos. This happened about five or six year ago. I found their was a voltage control board for two halos and the upgrade set had one control board per halo.Now in present time, the HID's over the years is starting to burn the reflective housing for the low beams causing less light output. So I bought 2 pairs of 2.5 inch LED projectors for retro fitting and a new set of headlights. I couldn't wait for the silver eye brow to be into stock so I went with the cheaper set. My plans was to exchange certain parts from old new new set. My idea is to replace low and high beam with the LED projectors.After opening up the assembly, I found the halos do not have a voltage control board, when they use to some years back. Just direct wire. What makes this worse is their brightness is not as bright as my upgrade halo set has. The reflective housing for projector has a little rough finish in them and seems a little cheap. If your going to buy these, use them as a project for upgrading like I'm doing. The halogen bulb in these don't work well at night and not too bright. Projectors was meant for HIDs originally and now it's all about LEDs now. Projectors needs a bright source of light.!!! Very important to use a device like a "Carly" to re code your light. By what I mean is, disable the voltage monitoring to all lights, because they will strobe when car starts. I did this and the only lights that flicker are the halos, but I solved the issue by keeping the lights in on position all the time. When the car starts, the lights come on masking the affect of the strobe affect.
Maria Martin
Reviewed in the United States on April 30, 2022
these headlights are great. definitely updates the look of my 2011 bmw 328i.the only issue that I am having is adjusting them. I figured out how to adjust the vertical level but it seems like the outboard light needs to be adjusted horizontally. if anyone knows how to do this please reach out. there is a bolt on the top outboard corners that is labeled L / R. I have turned the bolt each way and doesn't seem to adjust the light. made sure my led bulbs were horizontal as well. so right now one light is shining at the 2 o'clock & 8 o'clock position while my Right headlight is perfectly leveled at the 3 o'clock and 9oclock position.
Austin Kreps
Reviewed in the United States on January 22, 2021
Ok so these headlights are great, they don't throw codes and they look wicked. Now on the install you'll have to take off your front bumper which can be a hassle but its to be expected. Another thing, the project lenses don't come pre aligned so keep that in mind you'll have to adjust them yourself. Now I don't know if this is an issues with how I mounted them or the way they sit on my car but the light emitted from the half halos aren't level with each other. One is aimed up and the other is like up and to the right or the left can't remember, oh well. But they look great and as my friend put it they look aggressive and that's fantastic. 10/10 would recommend this product.
Manny
Reviewed in the United States on May 7, 2020
These are the before and after pics! I am really happy with my purchase. BMW’s must have lights like these or else it just isn’t right! That’s why I had to buy this! However, with having such nice halo rings, it was a little disappointing to see the amber light shine bright in between both halos. I must have read the details wrong and been mislead by a few reviews but it’s ok. I’ll just purchase the correct white led light I want to put in. Otherwise My car looks great and It is still a major upgrade from my previous lights!
Heather
Reviewed in the United States on September 9, 2018
These headlights are easily the best appearance upgrade I've made on my car. My old headlights we're fogged up beyond repair and looked horrible (see the photo with the old headlights on the right, and these new headlights on the left). These lights are an easy way to improve appearance and functionality. They were very easy to install, taking about an hour and a half from start to finish. There are plenty of videos online that show you how to remove the bumper, replace the headlights, and reassemble. Some reviews mentioned these headlights throwing codes on their computer. I didn't experience this problem. In fact, before I installed these headlights, I had a warning light because one of the angel eyes on my OEM headlights was burned out. As soon as I installed these light, that warning light went away. Wiring could be cleaner as other reviews have mentioned, but it doesn't bother me as it isn't visible once the headlights are installed. There was one plug which wasn't used that I covered with tape like another review mentioned.Overall, the quality can't be beaten at this price. The dealership would charge you twice as much for a single OEM headlight housing. Save yourself some money, do the install at home, and enjoy your new headlights.
Recommended Products