Shopping Cart

Your cart is empty.

Your cart is empty.

Battery Cable Flanged Bulkhead Connector + Insulator Boot - Heavy Duty Weatherproof 12V Copper Core 3/8 Post, 550 Amp Max Rating – for Marine, Solar, Car Audio - Made in the USA (Red)

Free shipping on orders over $29.99

$24.99

$ 11 .99 $11.99

In Stock

1.Color:Black


  • IP65 Weatherproof Design - Protect your electrical system from the elements and pass current through a panel or bulkhead up to 13/32" (0.40") thick. Includes a reinforced silicone gasket for the flange of the connector and a boot for the terminal post to keep water, dirt, and debris out
  • High Energy Transfer - The nickel-plated steel 3/8" post and solid copper core allow higher torque than conventional bulkhead connectors with brass shaft. They are continuously rated for 440 amps @ 12V, or a maximum of 550A @12V for up to 12 minutes with a 80% duty cycle. Max voltage rating of 48vDC
  • Easy to Install - A 1.375" hole is all the connector needs to pass through the panel and a large hex nut secures it on the back side. The 4 holes of the flange allow you to use screws or bolts to further secure the connector and prevent any rotation
  • Heavy Duty Construction - The body is made of glass-filled Nylon, the core is made from copper, the silicone gasket is fiberglass reinforced, and the insulator boot has a IP65 weatherproof rating and meets USCG, ISO and ABYC safety requirements for energized terminals
  • Proudly Made in the United States - We are USA based, firefighter-owned, and we stand behind our products. All our connectors and parts are manufactured using high-quality materials. We understand it takes reliable power to get the job done right, so we only offer the best of the best



Product Description

battery connector

Heavy Duty Weatherproof Flanged Bulkhead Connector

Passing battery cables through a bulkhead panel or firewall can be a pain at best and can be dangerous if not done properly. With the heavy duty weatherproof flanged bulkhead connector from R2X Racing, you can safely route power from one side of a panel to the other while keeping it protected from the elements.

The glass-filled nylon body has a flange with 4 mounting holes to secure it to the panel with screws or bolts, depending on your application. The included fiberglass reinforced silicone gasket seals the flange to the panel and keeps water, dirt, and debris out. The included rubber insulator boot fits cable sizes from 2 AWG to 2/0 AWG and fits snugly into the groove on the connector. The insulator boot has a IP65 weatherproof rating and meets USCG, ISO and ABYC safety requirements for energized terminals.

The connector itself is easy to install. Simply drill a 1.375" hole for the main body of the connector and 4 small holes to match the mounting flange. The copper core of the connector allows for high energy transfer with little loss. Because of the flanged mounting design and nickel-plated steel shaft, this connector allows for higher torque than conventional bulkhead connectors with brass shafts. The connector is continuously rated for 440 amps at 12 vdc and can handle a maximum of 550 amps at 12 vdc for up to 12 minutes with an 80% duty cycle.

The red connector and boot are ideal for positive power cables.

body

Heavy Duty Body

The body is made of glass-filled Nylon and isolates electricity for safe use.

copper

Solid Copper Core

Rated for 440 amps @ 12V, or a maximum of 550A @12V for up to 12 minutes, with an 80% duty cycle.

steel shaft

Nickel Plated Steel Shaft

The nickel-plated steel 3/8" shaft allows higher torque than conventional bulkhead connectors with brass shaft.

isolator

Weatherproof Insulator Boot

The insulator boot has a IP65 weatherproof rating and meets USCG, ISO and ABYC safety requirements.

bulkhead
r2x
flanged bulkhead
flanged bulkhead

Michael T. Doherty
Reviewed in the United States on January 5, 2025
Built my own 412 ah 12v lifepo4 attery for my rv. These terminals were perfect. A little spendy, but heavy duty and safe. We'll worth it.
Daughter's Equipment Manager
Reviewed in the United States on April 28, 2025
Really nice power pass-thru; highly recommend
Brandon Garonzik
Reviewed in the United States on May 14, 2024
Worked great
Eric N.
Reviewed in the United States on October 2, 2024
Installing these as a bulkhead pass-thru where I need connector covers for both sides - the weather side and the inside to prevent accidental shorts.It would be nice if I could order a pair of covers I would be sure would fit tightly and potentially as a replacement should something happen to the original.
Justin
Reviewed in the United States on October 17, 2024
Well built. Definitely worth it!
Michael M.
Reviewed in the United States on May 2, 2023
Absolutely perfect and good quality! A little expensive but totally worth it!!! They even give torque specs to make sure you get the best cleaning force without ruining stud. And customer service is responsive and very accommodating!!!
KC
Reviewed in the United States on April 12, 2023
Well made, decent product.
S. Shook
Reviewed in the United States on January 7, 2022
I used this to bring power forward through a bulkhead and it works and looks great! You just have to heed the warnings on proper torque for the passthrough bolt. I swapped out the included bolts and used Nylon lock-nuts for securing the cable lugs.
Recommended Products