Your cart is empty.
Your cart is empty.Daniel Duarte
Reviewed in Mexico on March 19, 2024
Llegó roto
Theresa
Reviewed in Canada on November 8, 2024
Used and ran great on my moped. You do need to double check the jetting though cause as stock they may be too big of a jet size for most stock mopeds
Alan Zona
Reviewed in the United States on September 30, 2023
Had to use parts from old one to make this work
Alex K
Reviewed in the United States on August 23, 2023
This works as a replacement but it does not have the choke cut off like the original. Everything is a clone to stock. Works well enough that I'm not leaking fuel anymore!
Sonia
Reviewed in Canada on July 5, 2023
if you are going to put this on a tomos or puch moped you need to change two things. the mounting sleeve and the jet. the mounting sleeve is too big for those mopeds. the jet is also much too rich. swap those out from your old carb or order from another supplier. i always wd-forty the slide and choke. other than that..... it works just fine.
Jay
Reviewed in the United States on July 14, 2023
It's an OK carb. Does what I need. I just wish I didn't have to change the jet!
locohefe
Reviewed in the United States on May 29, 2023
Great inexpensive carb. Dead simple to operate. Not sure of the jet but could maybe agree with around #70. Running great on my '88 Tomos a3 50cc moped with a Techno expansion pipe. I plan to experiment with jet size on this setup but also plan to run this carb when I upgrade to a 70cc kit this summer. So i bought a bunch of jets to mess with. Knocked off one star for the jet not being stamped. Don't be lazy China. Lol ✌️
gakkun
Reviewed in Japan on November 13, 2023
トモスクラシックに使用しました。お陰でキック1発始動になりました。
ボンジョルノ
Reviewed in Japan on October 30, 2023
無事に交換できました。
Dwain J Garbett
Reviewed in the United States on July 25, 2020
This carburetor is a beefy boy just like the original Dellortos. I am using this as a replacement on a freshly rebuilt Puch Maxi 50cc 2spd 2hp.Pros: It is a no nonsense Carb that once its is fitted correctly to the bike works great.Cons: It comes jetted around #70 which is way to big for the 50cc motor I put it on, I have had to order a set of jets so I can lean out the fuel mix, it acts like its on choke all the time, so I will jet ii down to #65 or #61. It also comes with a large intake sleeve that is removable and I need to replace with a thicker sleeve for it to fit correctly on my intake manifold.Conclusion: I have seen a few reviews trashing this Carb, I respectfully disagree with those. A $25 delivered Carb that needs to be re-jetted and properly sleved for intake does not make for a bad product. I was able to make it work temporarily, until my jets and sleeve arrive, by adjusting the idle up and wrapping my intake pipe with aluminum foil to increase the pipe size ( an old leaking exhaust clamp trick). I know everyone wants it to be just a plug and play item, but this is a generic one-size-fits-all Carb and it will take a hair more effort but its worth it, because Bing style carbs are junk.
Chris McBride
Reviewed in the United States on January 5, 2020
These bootlegged carburetors are a piece of crap not even 6 weeks into using it the manifold inserts just split into 2 pieces for no reason and that most certainly isn't the first one from Amazon Prime at this has happened to me before what a piece of crap Amazons quality Prime selects huh.. seems like every product I get for my motorized bike from Amazon Prime is very low quality no wonder they're so cheap and so easy to get fast
Harold F. Larsen
Reviewed in the United States on September 18, 2019
Put it on my 250-D wards Ruiverside moped and it started right up !
lisa lopez
Reviewed in the United States on October 18, 2019
Carburetor is absolute piece of crap leaked ... Wouldn't run unless idol was turned all the way up and then absolutely no power
Recommended Products