Your cart is empty.
Your cart is empty.Product Description
Our carrier coating process flow needs to go through multiple links. First, strict preparation work is carried out on the carrier, and then a specific coating technique is used to evenly cover the material on the carrier.
We have multiple steps including packaging, spinning, laser, stamping, pipe cutting, and bending. Each step has undergone strict control and operation to ensure the quality and performance of the final product.
We adopt advanced welding technology and strictly control temperature, time, and welding strength to ensure welding quality. At the same time, we have our own mold processing center, which can be flexibly adjusted according to customer needs.
Our machine packaging process is operated by machines. Finally, the packaged three-way catalytic converter will be properly stored in the designated area and ready to be delivered to customers at any time.
Vehicle Fitment:
2001-2005 Dodge Grand Caravan 3.3L V6
2001-2007 Dodge Caravan 3.3L V6
2001-2007 Chrysler Town & Country 3.3L V6
2001-2003 Chrysler Voyager 3.3L V6
Features:
· EPA Compliant
· Large total substrate size
· Increase precious metal loading
Important Product Information
- For use with Federal Emissions Models
- Not Ship to California and Colorado New York, and Maine addresses
- OEM /Interchange Numbers: 642992
More Efficient Purification
PULCHERFLOW Catalytic Converter Have Enlarged honeycomb ceramic substrates will fully react with ample catalysts for a higher efficiency & green emission.
Stainless Steel Shell
PULCHERFLOW Catalytic Converter Have Heavy-duty stainless steel materials feature strong corrosion resistance and withstand high temperature.
Direct-fit Replacement
PULCHERFLOW Catalytic Converter Have OE-style is easy to install with bolts. It also passes EPA certification for reliability.
Paul
Reviewed in the United States on May 26, 2025
Works great
HC
Reviewed in the United States on August 9, 2024
Calza perfecto en el el escape pero no llega al final del silenciador pero puede ser utilizado
douglas
Reviewed in the United States on June 4, 2024
The catalytic converter fits my van no problem except the bolts.the bolts are way too short.
Sam
Reviewed in the United States on March 4, 2024
It was a good fit and I really can't complain. The only issue was the mounting bolts were too short. I had to go get some that were a 1/2“ longer, and I also had to use the old nuts because it was hard to get a wrench in them while tightening them up. They need longer bolts and nuts that can lock themselves in place as you tighten the bolt. I am surprised at the power I have gotten and still waiting to see if the gas mileage increases. I will post later if it does and I will post later about the parts performance after I have put a couple of hundred miles on it. Great buy overall!
Megan
Reviewed in the United States on March 17, 2024
2007 Chrysler T&C 3.8 The price is right... if you have access to modify. The provided bolts are easy too short, the gasket arrived bent, and the u clamp was too small. I purchased it because of the exhaust pipe that comes off the end and goes through the bend in the exhaust except it didn't match up with the existing pipe. I had to cut off about a foot and angle it so it had the right bend. Once inside the existing pipe, I was able to tack it with the welder and fill the 1/2 in. gap to seal it. I replaced the sensors as well and the code cleared so we'll see how long it lasts.Update: Product lasted 6 months. Code is back
Synthaholic
Reviewed in the United States on February 16, 2024
Despite the 'Check Fit' feature at the top of the page, which stated that it would fit my 2005 Chrysler Town and Country, it did not fit at all. The ends were not the same diameter as the one I was replacing, and there was no collar or similar to make them fit. Lesson: always check multiple sources to ensure the part is correct.
Tom B
Reviewed in the United States on November 7, 2024
Fit, It was not flared, so a bit more work then I expected. Cut a couple length wise slits in it and used the clamp. No code so far. :)
David Blair
Reviewed in the United States on April 9, 2024
If you have a way to cut and weld, you can install this converter with no issues. This isn't a direct bolt up and go. But after some modifying it flows correct and doesn't trigger check engine light.
Recommended Products
$167.87
$ 79 .99 $79.99
$439.99
$ 99 .00 $99.00