Your cart is empty.
Your cart is empty.Product Description
Specification
Material: Plastic
Voltage: DC 12V
Outlet Diameter:20.5mm
Inlet Diameter:20.5mm
Nozzle material: brass
Nozzle Outlet Diameter: 10mm
Shaft : Stainless steel (Not suitable for sea water)
Working temperature: 0-60°(32~140℉)
5 Level Adjustable Power (9-15W)
- Level 1: 7W , Water Flow: 320L/H (84GPH), Hmax: 12 ft (3.6 m)
- Level 2: 9W , Water Flow: 440L/H (115GPH), Hmax: 12.5 ft (3.8 m)
- Level 3:10.5W , Water Flow: 560L/H (150GPH), Hmax: 13 ft (4 m)
- Level 4:13W , Water Flow: 680L/H (180GPH), Hmax: 14 ft (4.2 m)
- Level 5:15W , Water Flow: 800 L/H (210 GPH), Hmax: 14.5 ft (4.5 m)
Note:
- 1.Before installation, make sure that the input voltage (DC 12V), power, etc are suitable for use.Pls do not use if it does not compatible.
- 2.Cut off the power, disassemble it and cleaning the pump when it is insufficient or not transferred.
- 3.The pump can only be used in fresh water, can not be used in corrosive liquids.
- 4.Do not pick up the submersible pump with power cord, or the power cord may be pulled off.
- 5.When the pump work, it should be completely immersed in water to ensure that the pump has a certain degree of cooling.
- 6.This pump don't has the self-absorption function, it need to place in the water when using.
- 7. The water pump is detachable. Please use it in clean water and clean the pump regularly to avoid clogging.
Size Information
Cable Length: 150cm(5 ft) 24AWG
DC Connector Size: 5.5x2.1mm
Product Size： 9.5x5.2x6.5cm （3¾ x 2 x 2½ inches）
Packing Included
1×Submersible Pump
2× Brass Nozzles
2× hose clamps
2× sealing ring
John
Reviewed in the United States on June 10, 2025
Thought this was a great little pump, but only managed to get 1 (3 month) season out of it before it quit on me 2wks into the next season. (Was dried and stored properly between seasons too.) Also, the digital flow controls on this are a bad idea...they don't always come back on at the settings they were left at.
terry cichos
Reviewed in the United States on March 14, 2025
They don't last more than 6 months
Mat
Reviewed in the United States on January 24, 2025
Bought this to install in my kids water table to keep the water flowing without having to manually pour it in the top for it to flow out the fountain holes. Works great! No complaints whatsoever.
Customer
Reviewed in the United States on November 13, 2024
Very weak pump. Doesn’t pull water at all.
D. E.
Reviewed in the United States on November 12, 2024
I use these pumps as boosters for my tank canister filter. They run 24/7 and have been now for 5 months now without any problems. Very easy to clean. One 12 volt power supply powers both pumps. These are a perfect add on as boosters because you never get the rated GPH as advertised so these pumps bring that GPH up to what the filter should be rated.Totally recommend very well built.
Ann (Dan)
Reviewed in the United States on January 24, 2024
I am using this pump for my hydroponics towers that I 3D print. This pump has been great and the adjustment is really nice to get the right amount of flow depending on the tower height.
OMG Leatherworks
Reviewed in the United States on January 23, 2023
I was looking for a not-so-powerful small water pump for a table top hydroponics NFT build. I had already made one system with a larger, more expensive pump that works well, but I thought this pump with a variable speed option, and cheaper, would be worth trying.It only has to lift water a few inches, so head pressure wasn't really important. I was hoping I could slow it down with the buttons on the pump. Well, when you power it up, it starts at it's lowest speed and can only go faster from there - the low speed was plenty. As you can see from the photo I attached, the 1/2 inch loop has a 1/4" barb coming off it with a valve attached for additional bleed off.Be aware, this pump does not come with a power supply. If you have an extra 12 volt output wall wart laying around from some abandoned electronic gadget, then fine. Other wise you're going to need to get an extra one.This small pump, on it's lowest speed is much louder than the large pump I have in the other NFT grow system. It, 'buzzes'? a bit. It seems to have gotten quieter over the last few weeks or I've just gotten used to it, but still...So far it's working fine for this project. And for the price, it's worth using until it goes out. Also, the outlet side is threaded so I could put a screw-on 90 degree fitting that adapted to 1/2" flex tubing. Not all pumps of this size can adapt right to 1/2 inch tube rather go to 3/8 inch tube, which is harder to find.
Maurizio
Reviewed in the United States on March 4, 2022
Bought this one to replace the pump that came with my Anvil chiller (brewing) it is so quiet I have to open the refrigerator to see if it's working. I love the speed adjustment and that it has suction cups to secure it to the bottom of my cold liquid bucket.The provided brass barbed hose adapters are so much better than the plastic ones provided with the Anvil pump, that was originally about 50 bucks. I am very happy with this product
Recommended Products