Your cart is empty.
Your cart is empty.Product Description
About DERNORD
DERNORD has been engaging in manufacturing commercial brewery, winery and food processing equipment like water heater element, sanitary valves, fittings, tank components and pumps for many years. We uses advanced numerical control machine tools, processing to ensure the high quality of our products. All DERNORD products are manufactured in accordance with different surface finishes, materials and industry standards. We manufacture a wide range of stainless steel sanitary valves and fittings such as stainless steel butterfly valves, sanitary ball valves, sanitary check valves, sanitary sight glasses, tube adapter and pipe connectors, etc.
About Product
- Cartridge heaters is consist of a cylindrical stainless steel 304 tube and thus provide a high corrosion prevention
- Screw-in Cartridge Heater in circular design with 1/2 thread and hexagon for precise heating of solids or liquids
- Portable & durable. Easy to install
- Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
About Cartridge Heater
- Cartridge heaters can be considered "component heaters" that are used to generate heat in many different applications
- These process heaters are primarily used in mold and fit snug inside a cavity and helps heat solids by reaching high temperatures. Various diameters allow for it to be used in any cavity. Lead wires extend from the end to your control panels.
- Cartridge heaters are used as a water heater element and in a wide variety of applications, such as bag sealing applications, hydraulic oil applications, motor oil applications, gearboxes, water heating applications as well as laboratory and food equipment.
point
Reviewed in the United States on June 11, 2025
element heats up VERY QUICKLY almost instantly. EXTREMELY SATISFIED with this product.Thank you
christopher mccann
Reviewed in the United Kingdom on September 23, 2024
All really good butCould have come with locking nut.
Tom McCormick
Reviewed in the United States on January 22, 2024
Running at 12v after about 20 minutes the wires going into the unit overheated. It melted the silicone covering and burnt the connectors off. The wire on these are 16-18 gauge range. This is to small for the 16 amp draw. I did some testing and was only able to run around 6v to prevent the wire leads from overheating. It seems they used 100w wires on a 200w element. I contacted the company directly and was told it was a bad connection issue from the heating element to the wire leads coming from it. When I asked what kind of support was available I was unable to get a response.To remedy the issue as I really needed a 200w element for my application, I purchased heat proof connectors, 12 gauge hi temp wire, and high temperature silicone. I attached my own wires to the element ends and applied silicone around everything for insulation purposes. I then used shrink tubing around the silicone, and finished it off with heat resistant electrical wrap. This has worked for me.
Bryan A.
Reviewed in Canada on November 23, 2023
Will be used to warm up water, in a very small tank.
alexmrad
Reviewed in the United States on October 3, 2023
I recommend this heater element
E. Badger
Reviewed in the United States on October 21, 2023
The wattage depends somewhat on temperature. As the unit heats up, the resistance drops, so I do see near 200W at 12v around 100C.The hook-up wires are 18ga with fiberglass insulation. This is very thin for the current drawn, and the wires themselves get very hot. They either need free-air ventilation, or to be replaced with heavier gauge.
jeffrey a woodcock
Reviewed in the United States on September 20, 2022
Appears to be just as described and in my quick test it heated very fast.
Orix G.
Reviewed in the United Arab Emirates on December 22, 2022
overheats the battry
Theresa Abbott
Reviewed in the United States on December 17, 2022
Using it to distill refrigerant to process out contaminants. Works as advertised.
Ben
Reviewed in the United States on December 12, 2022
I have 10 of these. The resistance measures out to about 1.1-1.3 Ohms. These would then be only about 130W max at 12V.
Recommended Products