Your cart is empty.
Your cart is empty.Frances
Reviewed in the United States on September 9, 2022
Everything was easy to figure out, fit tight after a couple of tries.
Kevin
Reviewed in the United States on August 4, 2022
Did the trick, but will not other hose sizes
Sparky
Reviewed in the United States on July 17, 2022
I hope to help folks NOT waste their money buying this product. It is cheap and a hassle to use because the water does not flow smoothly through the main hose. I have a few flower pots that I wanted to water with a drip system....nothing complicated here. I immediately found that the nozzles do not work properly...they either dribble water or they pop off the sprinkler stake. They are quite small and hard to find when this happens! I bought a hose water regulator to help with this problem...it did not...If you insist on buying this product, I suggest that you make sure you have one sprinkler stake per plant you wish to water and bring your patience!
John
Reviewed in the United States on July 17, 2022
Good kit with easy use. Plenty of hose line and parts to adapt.
Rebecca L.
Reviewed in the United States on June 18, 2022
As described. Make sure to get the pressure regulator that is required for drip irrigation!
E. Decker
Reviewed in the United States on May 8, 2022
Was NOT 1/2 inch to 1/4. The half inch size is more like 3/8 inch. All NOT compatible to other 1/2 inch supplies. I bought some extra 1/2 inch parts from the SAME company and they were 1/2 inch. In other words, they didn’t fit this set. If you only need what is in the set, it’s fine.
Gregory L. Schaub
Reviewed in the United States on May 30, 2022
Others have correctly identified that the 1/2" pipe is non-standard. It is actually 8/12 mm which means that the outer dimension is 1/2" (approximately). Regardless, it is almost impossible to find compatible fittings. I purchased the product with the expectation of supplementing with additional parts, but that this world provide a good starting point. I did manage to find a workable tee fitting, but am stuck on additional end plugs.In a related note, I thought that the 1/2" to 1/4" tee fittings looked great, and they do work. However, I discovered that they are really a workaround for standard hole punch fittings because the diameter of the 1/2 tube makes their use challenging. Do yourself a favor and spend a bit more for a kit that uses 16/17mm pipe. Also, while the 1/4" fitting and parts ARE standard, drip tape and normal emitters will be much more helpful in a vegetable garden. Those parts are much more helpful, and omit all the bubblers and sprinklers, at least for that application.
CatLady
Reviewed in the United States on May 23, 2022
This system is working well for what I wanted. I did not find one of the pieces to the kit and seller arranged for a complete kit to be shipped free of charge. Thanks again!
Recommended Products