Your cart is empty.
Your cart is empty.Product Description
Fit for:
1400-600,1403-500,1406-600,1409-600,
1410-750,1411-750,1413-800,1901-500,
1903-500,1906-650,1916-650,9906-600,
1801-500,1806-650,1813-800,1825-650
1 x choke thermostat cap
1 x red wire
1 x black wire
2 x gaskets
3 x bolts,other parts.
The electric choke is going to work is heats up the spring in the carburetor at 12 volts, it will pull down on the lever which is going to open.The electric choke is standard on many 1973 and later vehicles with emission advantages.
Kyle foley
Reviewed in the United States on January 30, 2025
Worked for what I used it for
Scott H.
Reviewed in the United States on October 28, 2024
Doesn't fit
bobwatts
Reviewed in the United States on May 9, 2023
The following is my objective review and unbiased results of my experience with this product. I have provided pictures and video when possible. I don't *do* unboxings. I really try to "tell it like it is".This aftermarket electric choke "kit" is *OK*. Not perfect by any means, but it is considerably cheaper than buying an OE part. There are a couple of items that may be a problem to some people, and I'll get to some other stuff.Frankly, the main part I am concerned with is the actual electric choke itself.The choke itself operates acceptably. It is slightly slower in heating up than a factory unit, but not enough to be a problem. Once it gets hot, it is HOT. It is definitely hot enough to burn you if you touch the coil.Now, the other issues. The screws that are provided can't be used, they are the wrong thread pitch. If you have your orginal screws, this won't be a problem.The round choke strap DOES fit OK. I show it in the pictures. Same size as OE.The actual choke housing is slightly smaller than OE. Probably lacks about .060 in diameter. This will not be a problem once bolted down. Frankly, I have seen choke housings that an OE choke would not fit in without some "persuasion". I have had to modify more than a few choke housings or choke coils to fit inside the choke housing, Holley, Carter AFB, and Edelbrock. So the fact that this choke is slightly smaller won't be a problem. There will still be a vacuum seal under the choke also.I tested this choke on an old Edelbrock core I had laying around, and it worked satisfactorily.(side note: My 40 plus year old "choke power supply" is apparently putting out well in excess of it's advertised 13.8V. I was not aware of this. So keep that in mind when you see the almost 20V DC being applied to the choke, and remember that I mentioned it opened slightly slower than OE. )Also, if you're interested, this is a rare opportunity for me to mention my background.Former Holley employee, owner of my own carburetor shop for over 20 years (1984-2004), and still do carburetor work to this day. Have probably rebuilt or repaired well over 30,000 automotive carburetors, for normal rebuilds and race cars.I'm qualified to comment on this part.
Shawn R.
Reviewed in the United States on November 27, 2023
I have an older marine generator that had a failed electric choke. I don’t know if the carburetor is one that this is supposed to work with but the dimensions were correct so I ordered it. The wire connectors were different that the one I was replacing but that is no big deal. The linkage for the generator made it a little fiddley to get put together but it worked out great.
Brian
Reviewed in the United States on October 10, 2023
Carburetor parts can be hard to come by these days, unless it's for something aftermarket. So, I was happy to find this kit, which will let me experiment with electric choke on a built up 2300 Ford engine that's been upgraded to a 2-Barrel carb.I'm not 100% convinced I want to eliminate the manual choke that I fitted (I live in an area free of emissions testing), but this will let me see if I can find a good compromise of driveability and convenience for not much money. It seems to be the same quality as others I've gotten at the parts store in years past, but those are now typically a special order item (slow!) and cost more than this kit.For the modest cost, I'm happy with what I received. The nature of parts like this for old vehicles is that they may require a bit of massaging for different applications. I typically re-use the fasteners and choke cap clamp that came on the original carb, so compatibility of the screws that came in this kit did not concern me.
Cam I.
Reviewed in the United States on December 26, 2022
Not sure if these are correctly made. I couldn’t get it to work properly. It lined up completely different than the original.
Danny Eldridge Sr
Reviewed in the United States on November 14, 2022
Awesome product
Recommended Products