Your cart is empty.
Your cart is empty. Add a little custom to your bike
Available with a chrome bracket or just the taillight
12V 23/3W bulb
Rudolf II
Reviewed in the United States on October 11, 2017
Really nice light, all metal, nicely chromed, no plastic other than lens. Looks great on bike, much nicer than the original oversize, rather clunky lamp. My lamp came from Lionparts and I had it in 3 days! As stated by others the license plate holes are off, easiest fix would be to merely drill new holes in your plate, I would NOT drill the lamp. I decided to make a bracket using some metal strapping materiel. Insert bolts from front to align with lamp holes, then drill bracket to align with plate holes and insert bolts from backside. I tack welded the bolts then ground them down; but you could probably just use a nut to hold them in place. Overall I'm quite happy with the looks and fit of this lamp.
Taiji on Maui
Reviewed in the United States on April 11, 2017
Nice product, with fatal flaw, do not buy,will not fit most license plates without drilling to the point of weakening the part beyond use, drilling new holes in your license plate which may be a huge deal, or making an adapter to fit the screw spacing.All of these options suck. Find one that is wider at the License plate out or else. see photos, last one is what I wanted....
cmd
Reviewed in the United States on July 12, 2016
Quality is there - no issues or imperfections with the chrome, the part seems very well made. Used it to replace the oversized plastic taillight of my Triumph Scrambler. Note that this unit doesn't have a ground, so bring the stock ground wire back to one of the screws on this one. Install was easy, although I had a little apprehension of drilling holes in my fender. Running light is bright, brake light is very bright. The mounting angle, shape, and chrome fit the style of my bike and are better quality than the stock parts. Excellent purchase and wouldn't hesitate to recommend.
Kevin S.
Reviewed in the United States on June 6, 2016
I really like this style taillight and the price was reasonable. Had to do a little modification to fit the contour of my fender, but ala and all very satisfied.
Rigoberto Lawndarts
Reviewed in the United States on December 31, 2015
For those wanting to use this with an American plate, the mounting holes do not line up... BUT, the mounting bracket is wide enough to line up if you drill a couple holes. Use your plate as a template, and drill away. Fairly easy if you have any experience with a drill.It's Emgo, so don't expect this to last more than a few seasons if you store your bike outside. I threw away all the mounting hardware it came with because it's not the best quality and replaced with stainless nuts and bolts.TIP: swap out the bulb for a high-output *red* LED bulb. These Emgo units are notorious for blowing filaments and the LED bulbs are much sturdier. The LED bulb will also draw less current, which is great for older bikes with weaker charging systems.
John
Reviewed in the United States on April 13, 2015
Nice unit! Has clean, simple lines. It's pretty well built. One thing to keep in mind is that there's technically no ground. The unit is grounded which means you'll probably have to run your own ground wire or ground it off the MC frame/body. Might want to research your wiring scheme before installing it. This tail light seems like much better quality than the cost. I'm happy with the purchase.The only con is that the license plate holes do not match US Motorcycle license plates. I drilled two holes and it worked out fine.I actually received this item broken and Lion Parts Powersports rushed me one right away! Talk about awesome customer service!
Chris B
Reviewed in the United States on December 2, 2014
It is a good looking and well built unit. It is going to look great on my 67 Shovelhead next spring.
Daniel McDermott
Reviewed in the United States on October 29, 2014
Fit my CB350F perfectly, and cleans up the rear nicely. Love this tail light. Perfect for that old school cafe' look.
Recommended Products
