Shopping Cart

Your cart is empty.

Your cart is empty.

FatFish F01-10C Bait Mold Soft Plastiс Lure Making Injection Mold for Do-It Fishing Lures 2'

Free shipping on orders over $29.99

$35.95

$ 18 .99 $18.99

In Stock

About this item

  • Durable fishing lure mold for unlimited injections.
  • Smart air vents design to release air and make sure that liquid plastic fills all details of the mold.
  • Detailed fishing bait design. Fine level of detail comparable with aluminum molds and far better than silicone molds.
  • High quality artificial stone. Stone powder mixed with polymers to create a low-porous and durable material, which is a perfect fit for soft plastic lure making molds.
  • Injection standard 5/8" fully compatible with FatFish plastisol injectors and most soft plastiс injectors.
  • Incredible detailed and inexpensive lure molds that are compatible with plastisol.
  • FatFish bait molds allow production unique fishing lures by using different lure shapes, lure colors, scent, softness, harness, and flavor.
  • Using only one lure mold and different additives you can make a soft plastic lure KIT such as ice fishing lures, saltwater lures, freshwater lures, bass lures etc.



Product Description

FatFish Tackle
  • Standard size injection: 5/8"
  • Lure Size: 2"
  • Prototype: G-lan Tail
  • Product of Ukraine
Note:

The color of the product may be different from that on the photo. The end-product soft lures are just examples and are not included in the sale.

Fishing bait molds are used to produce do-it soft plastic lures. This casting-form is a 10 cavity piece that produces ten 2in Tail soft lure for Walleye, Pike, Perch, Bass, etc. fishing, absolutely resistant to high temperatures and enough for an unlimited injections.

For best experience recommended to use FatFish plastisol injectors and FatFish Luresol (Plastisol).

Here's how it works:

Fix both parts of the mold with clamp, vise or even a binder clips.

Plastisol (soft plastic) needs to be heated to 180 degrees Celsius (356 F) and injected into the moId using injector.

FatFish DIY molds can be used with plastisol or recycled old soft plastic lures.

Lubrication: Recommended but not mandatory. will fit any oil ( olive, sunflower, etc.), for best results use silicone grease. Using of a lubricant improves the process of extraction of the finished soft lure from the bait mold and giving a gloss to the lure bait.

REMEMBER: Additional care and awareness urgently needed! Use protective clothing like gloves, long sleeves, pants, and closed toe shoes (no sandals) when pouring hot Luresol. Wear appropriate safety goggles and provide adequate ventilation in your work space too (either a fan or personal respirator).

BUY IT NOW! And you will get that you need to start soft plastic lure making.

Lure making kit

Easy to use

Fix both parts of the mold and inject heated to 180 degrees Celsius (356 F) soft plastic into the moId using FatFish or compatible plastisol injectors.

Injection standard

Injection standard

5/8" fully compatible with FatFish plastisol injectors and most soft plastiс injectors.

air vents

Air vents

Smart air vents design to release air and make sure that soft plastic fills all details of the mold.

bait design

Bait design

Detailed bait design. Fine level of detail comparable with aluminum moIds and far better than silicone molds.

Lure Size

Lure Size: 2"

Ten 2in Tail soft lures


Cletus Fehrenbacher
Reviewed in the United States on February 17, 2025
Great functional bait mold. Fills out great every time and produces a clean bait!
Bergeron
Reviewed in Canada on July 9, 2024
Permet la production rapide de leurres souples de menés. Je ne le conseille pas aux débutant en fabrication de leurre mais le produit est d'excellente qualité et durable
Customer
Reviewed in the United States on June 2, 2024
This mold worked great! The two halves lock together will so there isn't a lot of seeping, which cuts down on trimming time and waste. The material doesn't stick to the lures when they are finished. Well built and economical.
Tactical Potatoes
Reviewed in the United States on June 12, 2024
For those looking to craft their own fishing lures, the FatFish F01-10C Bait Mold offers a straightforward solution. This injection mold is designed to create 2-inch soft plastic lures, catering specifically to DIY enthusiasts who prefer customizing their fishing tackle.The mold itself is made from a durable material that withstands the rigors of repeated use. Its design ensures that each lure is molded with precision, which is crucial for the performance of the finished products in water. The simplicity of the injection process is a plus, making it accessible even for those who might not be very experienced in lure making.However, it's worth noting that the success with this mold can vary depending on the type of plastic used. Some users might find it tricky to get the temperature and timing right to avoid imperfections in the lures. There is a bit of a learning curve, which might frustrate newcomers to lure making.The price point is reasonable, considering the potential cost savings over buying pre-made lures. For anglers who enjoy a bit of customization and have the patience to refine their technique, the FatFish F01-10C Bait Mold can be a useful addition to their fishing gear.While this product won’t revolutionize your fishing experience, it provides a reliable tool for those interested in the craft aspect of fishing.
D. Donofrio
Reviewed in the United States on April 26, 2024
I'm a newcomer to making my own plastic lures, but I love this artificial stone mold. It is an excellent quality mold and I expect to get a lot of use out of it.
Barbara K.
Reviewed in the United States on April 24, 2024
These artificial stone molds make great looking baits. They are easy to inject with a standard 5/8" injector. They have two pegs to help you line the 2 sides up. I use 2 medium hand clamps to hold them tight. One thing I learned the hard way, make sure to oil them well before your first use and every couple pours after that. They are a lot cheaper than their aluminum counter parts.
Bryant Buttars
Reviewed in the United States on April 21, 2024
It's kind of small, but pours good baits. Not much else you can say about it. WOrth the cost.