Your cart is empty.
Your cart is empty.Product Description
- Standard size injection: 5/8"
- Lure Size: 2.8"
- Prototype: Swing Impact Fat
- Product of Ukraine
Note:
The color of the product may be different from that on the photo. The end-product soft lures are just examples and are not included in the sale.
Fishing bait molds are used to produce do-it soft plastic lures.
This casting-form is 3 cavity piece that produces three 2.8in Swimbait soft lure for Walleye, Pike, Perch, Bass, etc. fishing, absolutely resistant to high temperatures and enough for an unlimited injections.
For best experience recommended to use FatFish plastisol injectors and FatFish Luresol (Plastisol).
Here's how it works:
Fix both parts with clamp, vise or even a binder clips.
Plastisol (soft plastic) needs to be heated to 180 degrees Celsius (356 F) and injected into the moId using liquid plastic injector.
FatFish DIY molds can be used with plastisol or recycled old soft plastic lures.
Lubrication: Recommended but not mandatory. will fit any oil ( olive, sunflower, etc.), for best results use silicone grease. Using of a lubricant improves the process of extraction of the finished soft lure and giving a gloss to the lure bait.
Easy to use
Fix both parts of the mold and inject heated to 180 degrees Celsius (356 F) soft plastic into the moId using FatFish or compatible plastisol injectors.
Injection standard
5/8" fully compatible with FatFish plastisol injectors and most soft plastiс injectors.
Air vents
Smart air vents design to release air and make sure that soft plastic fills all details of the mold.
Bait design
Detailed bait design. Fine level of detail comparable with aluminum moIds and far better than silicone molds.
Lure Size: 2.8"
Three 2.8in Swimbait soft lures
Craig Johnson
Reviewed in the United States on June 24, 2025
This mold is terrible, unable to dull injecthe ends of each one have to be trimmed. I don't recommend this mode. Even if you're just shooting a single color you'll be pulling strips off the end of each vain.
Bob P.
Reviewed in the United States on February 3, 2025
The baits made require a bit of trimming, but they are exactly like the ones I’ve been buying which is a real money saver.
Brian
Reviewed in Canada on November 1, 2024
It's a decent bait shoots well.but baits are dull and don't laminate very well
G
Reviewed in the United States on April 2, 2024
Waiting to take the boat out to try it
Joshua Borkholder
Reviewed in the United States on June 25, 2023
It works fine not great. Need a strong press to hold together to get a good solid push on it.
Eric
Reviewed in the United States on May 14, 2023
Shoots ok. Flashes out a bit with too much pressure. I use a vise to hold it together so I know it’s not loose clamping. Minor defect on one side of the mold. Makes the hook slot on one of the baits look funny. You can see the side on the right has no ribbing around the middle. Good practice mold or for what I do and recycle my plastic. Wish I could contact the seller for a fix and not have to return it and wait on a new replacement.
VS
Reviewed in the United States on March 11, 2023
Mold shoots consistently everytime. Hit the mold with some silicone spray in-between pours for a higher quality bait. Not necessary but makes for a better looking final product.
katlyn r.
Reviewed in the United States on November 29, 2023
Good quality and works well, my son loves making his own bait
Glenn McLain
Reviewed in the United States on April 26, 2023
Shot a few so far so good, have not had chance to use baits yet
Recommended Products
$86.99
$ 33 .99 $33.99