Your cart is empty.
Your cart is empty.Product Description
The Hedgehog spiral featherboard has a unique spiral shape and single knob that quickly pivots into position with one hand. Traditional featherboards require you to stop what you’re doing, loosen two knobs, reposition the featherboard, and then retighten each knob.
The Hedgehog's Benefits
The Hedgehog featherboard's spiral shape and curved fingers reduce kickback which is when the board is flung back toward your body. The board easily moves in the foward direction but not in the reverse direction.
The Hedgehog featherboard improves safety by pushing the board tight against the fence which helps reduce kickback.
The Hedgehog featherboard is made of toughened engineered DuPont nylon resin for strength and impact resistance.
FAQs
A: 3/4-inch wide x 3/8-inch high: The miter clamp is cast aluminum and CNC milled for tight tolerances and a precision fit. It is designed to fit 3/4-inch wide miter slots. If you have a 5/8-inch or metric miter slot, the Hedgehog miter clamp will not fit. However, a bundle is available that includes a 5/8-inch miter clamp: search for B09M2M53YK.
A: Yes! Simply disassemble the Hedgehog, flip the body over, and re-assemble.
A: The minimum reach from the center point of the knob (or center of the miter slot), with two "feathers" contacting the workpiece is 1-9/16 inch. The maximum reach from the center point of the knob (or center of the miter slot), with two "feathers" contacting the workpiece is 6-3/4 inch.
A: Holding the Hedgehog in your hand, tighten the knob A LOT. This will flare out the miter clamp. If that does't work, use a flat blade screwdriver inserted into the gaps on the miter clamp to flare it out. Go easy as it doesn't take much.
Customer photos of the Hedgehog in action!
The Hedgehog in its natural environment
The Hedgehog getting a table saw dust bath.
The Hedgehog resawing on a band saw
The Hedgehog is a versatile featherboard that is an excellent aid in resawing on a band saw. For even more support for resawing, check out the Hedgehog bundle that includes two Hedgehogs and a Tall Stacking Accessory: search for B08JD43ZWX.
The Hedgehog keeping things tight on a router table
The Hedgehog helps get clean, smooth cuts at the router table.
The Hedgehog is reversible to work on either side of a table saw blade (as well as band saw blades)
Sometimes you need to work on the other side of the table saw blade. Simply remove the Hedgehog's knob, flip the hardware to the other side and you're good to go!
Frank C Collins
Reviewed in the United States on May 7, 2025
Perfect fit for my tablesaw! Works like a champ!
Customer
Reviewed in the United States on February 9, 2025
This works perfectly in an older 5/8" miter slot.
Sam Matteson
Reviewed in the United States on September 28, 2024
Check your device slot width to assure that the Hedge-hog Feather Board will fit. If you have a 5/8 inch slot (rathar than the standard 3/4 inch width) you will need this item. Replacing the standard clamp with this item adapted the Hedge-hog to my table saw. It holds securely and is easy to change out.
Cliente de
Reviewed in Mexico on May 16, 2024
todo llego en excelente condicion y tiempo y forma
Recommended Products