Your cart is empty.
Your cart is empty.
- The controller support up to 4 different axis. X/Y/Z/U : X/Y axis are used for normal engraving/cutting. The Z axis is used for the motorized table. The U axis is used for the automatic feeding systems.
- Auto focus supported. User can add the auto focus function for the machine, this is very convenient for the new users.
- User can set smaller power in the corners to the the best cutting result.
- The controller will record the last cutting/engraving point. Even there's a sudden power cut off, user can still continue the job without waste the time and also the materials.
- Multiple format supported. Support DXF, CDR, AI, PLT, JPG, PNG, BMP, DST, DSB, GIF, MNG, TIF, TGA, PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW
- Cut or engrave vector formats directly.
- Engrave photos directly, use can take a photo and then load to the software and then engrave a good quality photo directly.
- Provide multiple optimization for cutting path.
- User can draw and edit graphcs directly in the software. And user can also use enlarge/rotate/copy and many other functions.
- Color mapping layers. User can set the jobs into several different layers and then set different layers with different speed and power. Thus achieve a complicated job just in one turn.
- Support array output and automatically fill the work area with max graphics. And the software can also simulate the jobs. Thus, user can preview the job before engraving/cutting.
- The "Run Box" function can help user to locate the work before engraving/cutting thus, user can put the materials on the correct position.
- Start point setting. User can set the start cutting point freely and easily.
- etc.