Why is the waterproof performance of LEDMO outdoor lights more trustworthy

1.Introduce expensive waterproof testing equipment,Establish a waterproof testing department

You can view our video (tracking the whole process of waterproof test)

Firstly，after product assembly, put each product into the waterproof equipment

to simulate a rainstorm scenario for testing for 5 hours,

Next, the staff of the waterproof testing department will blow dry

and check each lamp one by one to see if there is water mist or water ingress,

If any of the above situations occur, they will be selected and will not enter the next testing phase

You don't have to worry about burning out the lights due to rain,

and you don't need to frequently stand on high ladders to replace your outdoor lights within 3 years

2.Choose more expensive silicone rubber instead of the low-cost EPDM solution

Silicone rubber provides better sealing and insulation, tailored for your safety

Selected from 15 material suppliers,the sealing technology is more mature,

and customized silicone rubber for LEDMO'S outdoor lights

Prevent rainwater from entering the interior of the luminaire under adverse weather conditions

Providing safety and extending product life

Why must LEDMO choose exposed blue photocell instead of a built-in transparent photocell?

Compared with the others' plastic photocell sensor

our parking lot light take the copper sensor instead of the cheap sensor.

With the copper sensor, the outdoor lights is with higher sensitivity and not easy to break.

Advanced photoelectric sensors provide you with energy saving and intelligent life.

When you drive home at night, you never worry about the darkness outside your garage,

and your monitoring equipment is clearer

Dusk to dawn outdoor lighting offers a great deal of security

and style to your home's immediate outdoor vicinity.

3.Redesign the lamp structure

From the previously perforated rear cover to the current sealing design

Based on the conclusions obtained from our communication with 1000 customers,

Immediately feedback with the engineers and designers of

the LEDMO team to upgrade and reconstruct street lights

How does LEDMO configure high-quality and high-efficiency drive power for outdoor lights

The power factor is required to be above 0.9.If the power factor is lower than 0.6

it belongs to unqualified or junk products, which not only has a short service life,

but also consumes more electricity than the nominal value,No power saving effect.

At the same time, the current harmonics are also large, and the current is unstable,

It is detrimental to the lamp bead life and the overall lamp life.

The life of the power supply directly affects the overall life of the lamp,

The theoretical lifetime of LED lamp beads is greater than 50000 hours,

The service life of the power supply is between 5000 and 30000 hours,

LED lamps cannot ensure product quality and service life without a good driving power supply.

Based on the above knowledge, LEDMO is equipped with instruments and personnel to test and screen the power supply

How does LEDMO choose high-quality lamp beads for outdoor lights for yard?

The key to different quality LED chips is their lifespan,

Lifetime is determined by light decay.

Low light attenuation, long life, long life and expensive

The chip quality determines the brightness and light decay of the lamp beads.

Good lamp beads not only have high luminous intensity,

And light decay is also small.This can only be verified through time comparison,

After a year of use, the brightness of inferior products began to darken.

The LEDMO team passed repeated screening tests,Retained high-quality lamp bead suppliers

How does LEDMO test screening?

Test the antistatic ability of lamp beads

And leakage current of lamp beads, etc

Lamp beads with strong antistatic capability have a long service life

Only lamp beads with an antistatic capacity greater than 700V are suitable for high-quality lamps

LED lamp beads are unidirectional conductive light emitting bodies. If there is a reverse current,

LED with high leakage current has a short lifespan

Warm Tips For Parking Lot Light

The importance of selecting high-quality outdoor lights

When it comes to outdoor lighting on commercial buildings,

there are many options. But they’re not all created equal.

Some fixtures just aren't made to last. Not only will they look worn out and cheap

after a season or two, they might stop working altogether.

It's smarter to put a little more money into high-quality, contractor-grade lighting fixtures.

Most of these include a significant service, so the risk is low.

● Lower maintenance

Typically, the better the lighting fixtures, the lower the maintenance cost.

High-quality fixtures last longer and look better than those made of cheaper materials.

●Improved light quality

Get a better quality of light is better with the adjustment features

and customization options of high-quality fixtures.

Because of our specialty, we have a large number of professional customers

They have always believed that our products can achieve their contracted lighting projects,

and frequently choose LEDMO's outdoor lighting products