Your cart is empty.
Your cart is empty.This product disperses rapidly to establish a chlorine protection quickly. It stabilizes pool water and extends the life of the disinfectant. Use a reliable test kit to determine the stabilizer concentration in the pool water. Follow the included chart to bring the pool water to the desired range of 40-100 ppm. If the pool is new, just refilled, or has no stabilizer; add 4 oz. of this product per 1000 gallons to give the desired range of 40-100 ppm. Add this product slowly into the skimmer, or if desired, premix in a pail of warm water and then add directly to the skimmer. Be sure the filter is clean. Recirculate the water continuously for 24 hours to dissolve completely. Always maintain the chlorine residual in your pool at 2.0-4.0 ppm and pH at 7.4-7.6.
Jacob Babinec
Reviewed in the United States on June 12, 2025
Excellent price and great product!
Rollo
Reviewed in the United States on June 11, 2025
Excellent product works well and costs much less than in person stores
steven w ohrt
Reviewed in the United States on June 11, 2025
Works great
Rich
Reviewed in the United States on May 2, 2025
use for the pool. works good
Angelique
Reviewed in the United States on March 6, 2025
Works but have to use more than the directions indicate.
Remy McNamara
Reviewed in the United States on February 4, 2025
The Pool Mate 1-2604B Pool Stabilizer is an absolute game-changer for maintaining a healthy and efficient chlorine balance in my pool. Living in Texas, where the sun can be relentless, keeping chlorine from burning off too quickly is a challenge—but this stabilizer does the job perfectly!🌟 Why This Product Works So Well:✅ Protects Chlorine from UV Rays – Drastically reduces chlorine loss, so I don’t have to add chemicals as often.✅ Saves Money on Chlorine – Since the chlorine lasts longer, I’m using way less over time, which cuts down on costs.✅ Dissolves Well – Unlike some stabilizers that take forever to mix, this one dissolves efficiently when added properly.✅ Keeps Water Crystal Clear – Helps maintain consistent chlorine levels, reducing algae and cloudy water issues.✅ Works for Saltwater & Chlorine Pools – I use a saltwater chlorinator (Intex QS1200), and this keeps my pool perfectly balanced.If you're tired of chlorine vanishing in the sun and constantly having to adjust levels, this is the stabilizer you need! Just be patient—it can take a few days to fully integrate, but once it does, you’ll notice a huge difference in chlorine efficiency. Highly recommend for any pool owner! 🌊🔥
rolland browning
Reviewed in the United States on April 18, 2025
Local pool store is way over priced on stablizer so this is a good price and a heavy box.
Pam McLennan
Reviewed in Australia on October 1, 2024
The smallest packet - doesn’t work terrible product
Ralph
Reviewed in the United States on June 23, 2023
I'm cracking up at the people saying things like, "it didn't raise my chlorine level at all" or "it takes forever to dissolve".This is chlorine stabilizer and conditioner designed to slow down chlorine burn off, not raise your chlorine level. And as far as taking forever to dissolve, you can use the sock method others are talking about or you can do what I do: I buy 4 lb. bags about 3 times a summer. I add about 1/2-3/4 of a lb. at a time directly into the skimmer basket. When I go back 30 minutes later, it's all dissolved and I repeat this procedure until the bag is empty. If you spend a Saturday afternoon at the pool, if you can't work this procedure into the day then you should just close your pool.
Recommended Products
