Your cart is empty.
Your cart is empty.One gauge tells you the pressure to the keg and the other shows how much air is left in your air tank. Nonadjustable "shut down" blows off at 55-65 psi. Has a convenient air shut off switch. The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure. In stock and ready to ship. Features: 0-60 gauge measure pressure to each keg. 0-2000 gauge measures CO2 in tank. Has air shut off switch for CO2 line. High CO2 volumetric flow to insure continuity in product dispensing. Bonnet material is glass-filled polycarbonate. 10 Micron filter built in to keep contaminants out of regulator. Less prone to freeze up problems. Approved by Pepsi and Coca-Cola. Includes: Includes double gauge regulator. . .
Buckwheat
Reviewed in the United States on January 24, 2022
The only issue is it didn’t come with any documentation
Adam D.
Reviewed in the United States on July 30, 2021
Its a Taprite! Its about 15-20 bucks less than anywhere else! What more donyou need to know? You want a good solid CO2 regulator this is it.
Charlie
Reviewed in the United States on July 1, 2020
I was sent a used broken regulator 😡
Fireman860
Reviewed in the United States on May 11, 2016
This is a great regulator. You can't go wrong with it. I bought this to replace the one that comes with the kegerator.
b00z0r
Reviewed in the United States on September 23, 2014
Easy to use and read. I'm happy with the overall quality.
Tim C. Andy
Reviewed in the United States on April 3, 2014
I first bought this product from a local home brew store about 18 months ago. When I brought it home and hooked it up I was having problems locking the dial in place. That didn't concern me too much because it was my first kegerator setup and I was anxious to have my homebrew on tap. I continued to have problems with beer being over carbonated and the PSI creeping up on the regulator, but I was attributing all of this to user error. Two weeks ago I finally reached out to Taprite directly and explained my issues. They immediately sent me a replacement bonnet. The replacement bonnet is installed and operating exactly how it should be. I couldn't be happier with the product now that everything is working as it should.I should have asked them about the issues I was having a lng time ago but I was very impressed by the customer service. I'd definitely purchase a Taprite product again.
AZ Guy
Reviewed in the United States on September 4, 2013
No screw driver or tools required. Seems like good quality. I would buy the gauge cage for it. Tipped over once and easily bent the dial housing.
Alexei Karam
Reviewed in the United States on February 27, 2012
Looks nice, feels solid, performs great, is very precise. The installed valve is great and is all metal thus is heavy duty. The setting remains the same over time, never needs readjustments and the locking regulator knob is a great feature. I am happy I purchased this particular model. I use it for making soda water and have it set to 45psi, works without any problems or blow offs.
Recommended Products
