Your cart is empty.
Your cart is empty.B. Raymond
Reviewed in Canada on May 5, 2025
Works great!
Curtis Casteel
Reviewed in the United States on July 28, 2024
Initial Review: After about 2 months, one headlight has completely stopped work.UPDATED Review: The vendor immediately responded to my review with a manufacturer warranty. They expedited a new set out free of charge. Installed and they work great!Overall, I could not be more pleased. The customer support to rectify this issue is unparalleled. They stood behind their product, immediately reached out to the customer, and resolved the issue.I offer a very humble THANK YOU to their team!HIGHLY RECOMMEND!
UniRec
Reviewed in the United States on May 4, 2024
I had to disable the daytime running lights in my 2001 Chevy Express 2500. They intermittently flashed with the turn signals or the left signal flashed when the right signal was used. They were very helpful trying to tell me how to wire them correctly, which I did, but there is obviously a short in one of the lights. Never offered to replace them.
Carol
Reviewed in Canada on March 16, 2024
They are awesome. Thank you. Totally recommend.
Stephen F.
Reviewed in the United States on December 30, 2024
Great cutoff, high beams are super!
RCMoeur
Reviewed in the United States on November 14, 2024
They are a drop-in replacement for older H6054 low+high beam headlamps. I installed them on my 1988 Chevrolet C1500 pickup. They fit in the bezel and installed easily (lens writing face up, wiring on back toward the bottom). The standard three-pin connector works well with most older vehicles that use that connector. The bonus DRL and amber signal functions are connected with separate wires with bullet connectors.These headlamps have a strong beam pattern, but the cutoff isn't too abrupt - I needed to make a few passes at adjusting the angle to balance low-beam light throw with excessive glare. High beam is brighter than a typical halogen, but has a relatively narrow vertical angle.The DRL and amber signal functions are disappointing. The white DRL function can be set up on an older vehicle with a few wires, a relay, and a tie-in to the ignition auxiliary function. However, in bright sunlight it's just not all that conspicuous. The amber signal function overrides the DRL in the same areas of the headlamp (there is a small delay before the white comes back on after the amber stops), and can be tied into the turn signals, but it just isn't all that bright in daytime. I'm also not a big fan of bullet connectors, and the pigtails for the bonus functions are short, so replacing them with other connector types can be done but can be tricky.The DRL and amber signal draw 100 mA per side. The high beams draw 2.5 A per side.So overall they're better than standard 6054 sealed beams for the basic low/high beam functions, but the bonus DRL and amber signal functions just aren't as good as I had expected.
Michelle Hintz
Reviewed in Canada on November 12, 2024
UPDATE: May 2025 after only 6mos of use, my DRLs flicker non stop.Never did figure out how to wire in the signals & bolt thingys. Shoulda just stuck with the old bulb & housing set up.. waste of money!We put these in my 06 Jeep TJ. Easy install. Lights are bright & easy enough to aim.Hibeams look like oval flashlights above the low beam cut off. Odd beam pattern but they still light the distance up fairly well. Low beams have great beam pattern & light up the road very well.Be sure to correctly aim your headlights after install or you will have every oncoming vehicle flashing you!CONS:According to directions I SHOULD be able to have the little bolts light up as my daytime runners. Nope. Don't work. They won't light up at all.They're supposed to work as signal too? Nope. Don't work on mine!So I am annoyed I paid a higher price for these extras only to have them it work. I should've gone with the plainer style.
MJB Ontario
Reviewed in Canada on April 24, 2024
These lights are very bright but they don't focus to one spot when adjusting they seem to span out in a wide angle.
DJ
Reviewed in the United States on September 25, 2023
Love these headlights. Super easy to install, came with necessary adapters, and look amazing. The beam on them is perfect and bright.
Aydon M.
Reviewed in Canada on December 26, 2023
2015 wrangler sport.First off you will need to do a little bit of wiring to install these properly. We used alligator connections to connect to the turn signal wiring. We also replaced the heat shrink that came with the headlights with our own because the one it came with wouldn't shrink and just burned. A little extra info: yellow controls the signal flash and red is power. yellow to white and brown*? At the turn signal, red to the other white wire. If you're colour blind good luck 'cause they're very similar in colour.You may not need to get a CAMbus to get rid of the hyper flash from the turn signals. We found as we were testing that the hyper flash dissapeared after the oem turn signal was re-installed.Be aware that the part that holds the lights in is a little fragile, one of the metal tabs broke off. Cheap part to replace, already found a new one on amazon for $25.Update: the high beam lights on this are a focused beam that shine roughly 150- 200 meters down road. The low beams are as bright as daylight and illuminate for to the sides aswell.Honestly I'm impressed with this product.5 star product. 4 starts for not being idiot proof.
Joe wolf
Reviewed in the United States on December 11, 2023
weird throw of lights- high beams barely any change- brighter than oem but it throws weird i cant srr clearly as it leaves shadows inside the beam-- i hate these in the hills - waste of cash AND THEIR RESPONSE....Dear james,Sorry for the inconvenience that has been caused.We will forward the problem to the factory.Sincerely,Choccy from Sinoparcel Autoamd WHAT THE HELL IS THE FACTORY GOING TO DO TO FIX THE ISSUE?
Worthington Reviews
Reviewed in the United States on November 28, 2023
I bought these to add some extra light on the front of my '89 4runner. They work really well and easy to install. the only problem I had when adding them on an obs vehicle are crossing some of the wires up on the harness plug. They make an adapter with a resistor to upgrade to the Leds by crossing the ground and common with the harness you should be good. great product.
waseem
Reviewed in the United States on October 31, 2023
The turn signal blinking fast.!!Do I need to install any resistance to the sircle?
Recommended Products