Your cart is empty.
Your cart is empty.Product Description
Hydraulic Electric Diverter Valve Kit for John Deere 1025E, 1026R, 1025R, 2025R, and 2026R Tractor Models with 120R Loaders
Features:
- 6 Ports with #8 SAE (3/4”-16) Threads
- Max Operating Pressure: 3625 PSI
- Flow Rating: 13 GPM
- DIN 43650 Connector
- 12v DC
- Switch manufactured in Canada; valve made in Europe
This electric solenoid operated diverter valve allows you to easily add another hydraulic function such as a grapple to your John Deere subcompact tractor. Our kit is designed to be plumbed in line with your loaders tilt function. Fluid passes through Ports P1/P2 to C/D when the trigger is pulled on the included joystick handle. Then, the flow of fluid will switch from the tilt cylinder to the new auxiliary circuit (A/B). To open and close the auxiliary circuit, press and hold the trigger and move the joystick side to side to open and close the auxiliary cylinder. As soon as the trigger is released, flow will automatically switch back to allow use of the tilt function.
Benefits:
- Ergonomic joystick handle with integrated momentary trigger threads directly onto existing joystick lever
- 1/4” Ag Style Couplers and fittings fit John Deere Subcompact 1000 and 2000 series tractors
- Works with Double or Single Acting Cylinders
- Used to add grapples, snow plows, snow blowers, augers and more
6 Ports with #10 SAE (7/8”-14) Thread
Ergonomic Joystick Handle
Max Operating Pressure: 3625 PSI
Why Summit Hydraulics?
USA Distributed
All Summit Hydraulic products are distributed in the United States by our local family owned and operated company.
Superior Quality
We focus on superior quality and are doing our part to provide the solutions to those who build our world and farm our food. We stand behind our products and are proud to offer reliable products at fair prices.
Our Vision
To make hydraulics more accessible and easier so the people building and farming our world can get more done in less time.
Joe B. Parker
Reviewed in the United States on February 5, 2025
Instructions were not very good. I have a John Deere 1025r and the instructions seem to only address the installation for my tractor part of the time. Some of the installation required youtubing or forums to figure out.
LifeInTN
Reviewed in the United States on January 15, 2025
This was not advertised to fit a 2520 or a 200cx loader but it fits perfect and operates great. The only issue I had on installing was my valve lever is not threaded so the handle would not mount. I resolved this by running a 1/2” x 13 die and drilled out the supplied nut and tapped that 1/2-13.I would have given it 5 STARS if it was not for a packaging issue. The box broke open during shipment and the bag containing the fittings fell out and did not make it to my home. I contacted Summit and they overnighted the replacement parts. Great customer service response to my issue. ThanksBuy with confidence.LifeInTN
B D S
Reviewed in the United States on July 18, 2024
Great product - Easy install - As advertised - Will do business with them again.
Jimmy Coneal
Reviewed in the United States on May 14, 2024
The Summit Diverter kit worked great on my John Deere 1025R . Easy to install . Just remember to put the jam nut on the hydraulic control lever before you screw on the grip , screw the grip down to where it is far enough to be secure but not all the way down , then tighten the jam nut to secure the grip.I see a lot of people on videos try to screw the grip down without the jam nut and it will not line up whenthey get all the way down and they become frustrated.second , the fuse adapter has slots for two 10 amp fuses , use both. the kit comes with an extra fuse.one slot is to start the engine, the other is to close the circuit for the solenoid.
JASON FORD
Reviewed in the United States on January 2, 2023
Small hoses could stand to be about an inch longer otherwise went together just fine
Customer
Reviewed in the United States on August 29, 2021
Good quality. Works well
Recommended Products
$268.99
$ 99 .00 $99.00
$50.99
$ 27 .99 $27.99