Your cart is empty.
Your cart is empty.Product Description
Tool Daily: The Great Brand for Pressure Washer Accessory
Tool Daily are committed to developing more efficient and safer pressure washer accessory, helping people reducing the tiredness of spraying and cleaning in the garden. We are known for amazing pressure washer accessory, such as nozzle, wand, gun, coupler, foam cannon.
Feature
- 1. Size: M22 15mm + 3/8” plug, 3/8” quick disconnect socket + M22 15mm male. For M22 15mm fitting, the outside diameter is 22mm and inside diameter is 15mm.
- 2. Offer secure and quick fittings.
- 3. Working pressure is up to 5000 PSI.
- 4. Material: stainless steel and brass.
Application
1. Attention: The end is M22 15mm fitting. If you need 14mm fitting, it may cause leakage. Please buy anohter product with M22 14mm fitting.
2. Convert the M22 15mm thread-on couplings to a 3/8 inch quick connector.
3. Apply on universal gun, hose and pump connection.
Package List
1 piece quick connector coupler. Size: M22 15mm + 3/8” plug.
1 piece quick connector coupler. Size: 3/8” quick disconnect socket+ M22 15mm male.
WLai
Reviewed in Canada on May 3, 2025
Fits the Simoniz electric powerwashers and works well… no leaks!
nizzero nereo
Reviewed in Italy on March 29, 2025
tutto ok
DrumBoogie
Reviewed in the United States on January 24, 2025
Perfect fit on my Sun Joe
JME
Reviewed in the United States on June 1, 2024
These fittings are pretty generic for your electric pressure washer hose connections. Works great!! makes connecting and disconnecting a more simple process. Great product.
MJK
Reviewed in the United States on October 21, 2024
Fits my Husky electric pressure washer. It is easy to use and doesn't leak.
MO
Reviewed in Germany on October 21, 2024
Passt an meinen Makita Hochdruckreiniger. Schlauch kann schnell abgenommen werden und das nervige verdrehen hat (fast) ein Ende.
Ismail
Reviewed in the United States on October 19, 2024
Great quality and works in a snap no leaks .
Js
Reviewed in the United States on April 21, 2024
I attached this using pink Teflon tape (ptfe for water connections… thicker than white) on the threads and then I used Aladdin magic lube (lubricates and seals pool Orings) on the small oring on the male connector. This makes a water tight seal and makes connecting and disconnecting glide effortlessly. The lube also conditions and protects the oring rubber so it will last longer. I bought the brass 15mm and stainless 15mm sets. Attached the stainless set to the pressure washer itself and the brass one between the hose extensions.
Mark.
Reviewed in the United Kingdom on February 14, 2022
Easy to install. Eliminates the struggle to remove once a job is done.5 stars.
tom4416
Reviewed in the United States on August 21, 2020
I have an AR Blue 390ss that uses the somewhat strange 22x15 threads versus the more standard 22x14. I recently purchased a pistol grip for use with it which came with the adapter to accept the pressure hose from the AR unit but that required unscrewing the wand and screwing on the pistol grip so I wanted quick connects. These were inexpensive, well made, didn't leak a single drop and I realize that the 3/8 male quick connect side is actually a universal fit and so I can use my devices with my other pressure washer which is a Karcher. I can also quick change during a project (after depressurizing the hose first!) between the wand and the pistol grip.I do have a couple of suggestions to those that are getting leaks with these. Do not use teflon tape, there is no need for these type fittings, they make use of an o-ring to seal. Secondly, and more important, lubricate the fitting before screwing these on. Use a water soluble lubricant (astro glide works great but your buddies will wonder why it's in your tool box but let them use their imaginations) to coat the inside of the brass fitting. This prevents the o-ring from tearing, the number one reason these things leak. It will also make disassembly at some point in the future much, much easier. The water soluble lubricant won't damage anything inside the pump itself but you don't need a lot of it - half the size of a pencil eraser is plenty. It also lets you push the male side far enough into the female side for the threads to bite - very important because it will resist due to the tight fit (this is starting to sound like a cheesy romance novel!).Oh, and if you buy this set by mistake and insert your 22x14 hose into it, it will go together just fine, the external threads will match up just fine but it will leak like a sieve because the o-ring isn't making contact properly. Lots of people have done this, unaware that there is this strange difference in sizes that to the naked eye, look exactly the same.
Mike Lynch
Reviewed in Australia on October 4, 2020
The internal 15mm Swivel does not fit into a Ryobi pressure washer hose connection....although it should.Also, unlike other quick connect kits, it doesn't snap together in a "quick connect" fashion - you have to pull it down, push in the nozzle in, and then force the ring back up to make the connection work.Disappointing.
David
Reviewed in the United States on February 11, 2019
I purchased two option #2's and had hoped to connect them to my SunJoe SPX3000. Unfortunately the quick disconnect piece would not connect to my SunJoe hose. I contacted Amazon customer care and they promptly sent me a replacement. Unfortunately it didn't work as well. Amazon customer care wanted me to try another replacement but at this point I didn't have much faith that it would be any different. I also decided to send an email to Tool Daily to see what may be going wrong since other purchasers of this product did not have any problems. Long story short - Tool Daily customer care folks are great. We are still in the process of determining what is the issue but they have bent backwards to try to take care of me. I have told them that regardless of how this issue turns out, I will be giving them a 5 star rating. And its because of their customer care team. Be aware that even through their product didn't work, it wasn't because it was poorly made. My current guess is that I was sent the wrong part - possibly (still working on it). So as you can see I would recommend this company and its product whole heartedly.
Captain Ahab
Reviewed in the United States on April 8, 2019
This item does not fit a Stanley pressure washer hose. The female swivel does fit the gun but the male M22-15mm does not screw onto the hose. It is simply too small of a diameter. The inner portion is 15mm, but it will not thread onto the hose because the outside diameter is too small. This is my second purchase from a different vendor. I specifically asked the question if it would fit and this seller told me it would.Update: Tool Daily came through and sent me a replacement which is why I changed my review because this has gone very smooth thus far. It does leak a little but teflon tape seems to ensure min leak. Thank you Tool Daily for making this right.
Recommended Products