Your cart is empty.
Your cart is empty.Product Description
Ivanka Hnatkovych
Reviewed in the United States on June 6, 2025
“They’re so nice, I almost feel bad putting them on the car and getting them dirty! Super easy to install—anyone can do it. They look stylish, fit perfectly, and stay secure while driving. Highly recommend!”
Tim
Reviewed in the United States on June 1, 2025
2009 Tacoma - Fit my Factory 6 lug wheels. Center Cap pops off, these pop on.For what these are, hub caps, they are pretty nice. Compared to going to a local auto store and buying generic ones, that may or may not fit, look really cheap, see through the gaps and see the rim, these are specific for the Tacoma rim.They could use better instructions on the listing, and include them in the packaging so you don't have to come back to the listing to see.The foam needs to be around the most outer edge. The Foam if applied with no pressure does not fit the whole way around, but if you give it a little pull as you apply, it will stretch and connect all around.I had to removed strips from first one and redo, only tore one piece, but still fit. The foam they used is commonly found foam, so If I really cared I could just get slightly thicker foam, but I don't feel the need.They are a tad loose, but no looser then the stock center cap was. They have not fallen off yet, but I'm about to go on a cross country road trip, so it will be a good test.
Lenae
Reviewed in the United States on May 29, 2025
Huge upgrade to the look of the car for much cheaper than buying new wheels. Covered my rusty wheels entirely. Snaps on securely and doesn’t rattle thanks to the foam liner that is included. I would recommend them.
Will K.
Reviewed in the United States on May 19, 2025
I was going to put these on a 2007 Tacoma and was excited to update the look without needing to purchase new rims. Well, first off this does NOT fit, the lug-nut pattern is off and will not align with existing rims. Their description of "5 Y-spokes,Standard Leg" is misleading as the Y-spokes are not the standard OEM on some Tacoma trucks. Aside from all of that, there were no instructions included and no high-density EVA damping strips. So basically shinny wall hangers or very expensive frisbees.
Customer
Reviewed in the United States on May 13, 2025
Kinda like putting vinyl siding on a house.These remind me of the plastic "chrome" wheels I used to get in plastic model car kits. They have the same look and feel. They're stamped "ABS + PC," which, according to internet sources, is "high-impact engineering thermoplastic ideal for functional prototyping, tooling and low-volume manufacturing." I was surprised at how flimsy and brittle these seemed, since I was expecting something more like the tough, more flexible types of ABS plastic I am familiar with. It just seems like these will crack and pop off at the slightest insult. However, I have never had wheel skins before, and these do seem to be the same as others I see on Amazon, EXCEPT that it looks to me that you can get this exact same product for 25% less from another vendor. That's the only reason I subtracted a star from my rating. So, in spite of my first impressions, it looks like these will work great, and they certainly have saved me a load of work, since now I needn't go to the trouble of reconditioning the steel wheels I use with my winter tires, and I no longer have to have such a derelict-looking truck.Since enclosed instructions are now a thing of the past, it took me a bit to figure out just how these go on. The foam"damping strips" need to go on just inside the outer rim of these, leaving the small groove exposed that snaps over the outermost rim on the wheels. Expect a bit of an overlap of those foam strips, which you must snip off, as shown in my photos. Also, it took me a while to notice the cut-out for the valve stem, I guess because I got the chrome model and all the reflections kinda hid it. Finally, when you go to "snap" these onto your wheels, find someone with a strong, beefy fist, since you'll need to strike pretty hard and repeatedly. Hit them in the area shown in my photo in order to get them on without frustration. Sometimes, you'll need to go 'round and 'round until they cooperate and seat all the way down.
Ryan Anthony
Reviewed in the United States on May 12, 2025
I really wanted to dislike these Paanlok Wheel Skins while I was putting them on because the installation was more involved than I initially expected. However, I have to admit that despite the hassle, they genuinely look great on my truck. I'm torn between rating this 3 or 4 stars, so let's say 3.5 for the purposes of this review.Out of the box, one of the skins had minor scuffs, which was a bit disappointing. More concerning, though it doesn't seem to impact performance significantly, is the apparent lack of some tabs that extend beyond the spokes that I've seen on photos of other branded skins. I'd feel a bit more secure with those extra tabs in place.The most frustrating part was the instructions, which were not very clear. I was referencing the instructions on the product page, which showed installation over the center cap. However, the skins simply did not fit over the center caps on my 2022 SR 4x4. This did, in fact, required removing the center caps, which was quite an ordeal, especially since I don't have a garage that fits my truck and removing them requires jacking up the truck and taking off all the lug nuts.Additionally, and I'll admit this might be user error, it wasn't clear that the foam strips needed to be installed on the very outer edge. I initially installed them on the inner lip, just not on the very edge. This meant I had to remove and reinstall the foam strips. During removal, some of them tore, and I ended up clipping them a little too short during the initial install. Now, the foam strips have about a 1-inch gap and don't go completely around the perimeter of the skin.All things considered, I am happy with how they look now that they are on. I really hope they are secure and don't decide to part ways with my truck on the freeway! My main wish is for clearer instructions, and it was a minor annoyance to receive a scuffed product.
Recommended Products