Your cart is empty.
Your cart is empty.Product Description
NOTES
Choose the right size
Choose the right puck screen size for a proper fit.
Note whether the brewing head has screws
If your coffee machine's brew head has screws, avoid overpacking the coffee grounds, as excessive pressure could cause the puck screen to bend or become damaged.
Zack
Reviewed in Canada on June 8, 2025
I would not hesitate to recommend these. The quality, finish, thinness, and the magnet are 💯
Wood Sliver
Reviewed in Canada on June 8, 2025
Likes-- the corrosion resistant screen is magnetic!- the supplied magnet/screen remover works really well- very thin but strong metal; each screen will last a long time-very uniform perforationsDislike-- if I had to pay for the screens, I would be calculating how much coffee I could buy instead of the three screensConclusion-These screens are well under .4mm thick and could very well be as claimed .2mm. They are made of thin & strong corrosion-free metal. I seem to see the perforations are slightly smaller on one side than the other.They work well, keep the grounds from being left on the machine, and remove easily with the included magnet. I don't detect any difference in the taste of my coffee, but cleanup is much easier.It is a pleasant addition to my coffee making routine first thing in the morining.
Customer Review
Reviewed in Australia on June 10, 2025
This is a really nice puck screen. It's super thin with a very fine pattern of holes to help with the water distribution from the group head. It's also magnetic and comes with a handy (and very strong) magnet in the box which makes taking the screen out before knocking out the puck super easy!
Feline Reviewer
Reviewed in Canada on June 1, 2025
I really like this puck screen, it's so thin that it doesn't affect the amount of grounds you can put into the portafilter. Plus it more evenly distributes the water across the entire puck. The single best thing is the magnet though, it allows you to remove the puck screen easily before dumping the puck.There are some issues with the claims made though, it doesn't fully stop all espresso grounds from touching the group head, though it significantly reduces it in the order of 90-95%. The remaining I just flush away with a few seconds of water through the group head. Another is the claim of eliminating channeling, there's nothing this will do to stop channeling from espresso being ground too fine. More even water distribution is not channeling elimination.The issues with this puck screen is negligible at best so I highly recommend this. It's pricey but you get 3, maybe share with a few friends who with espresso machines. It's a metal screen and won't break easily unless you accidentally bend it.
🌟Simon S.🌟
Reviewed in Australia on May 29, 2025
I’ve had a couple of the usual sized thickness of these type of puck screens which are really thick which means cutting back on the amount of coffee that can fit into the portafilter so finding these super-thin screens has been great! Another advantage is having the little magnet to pull the screen out! Brilliant! I used to have to dig the thick screen out with a knife so pulling this thin one out with the magnet works perfectly. 👍🏼👍🏼
Bill B.
Reviewed in the United States on May 22, 2025
Works great keeping my new Casabrews ultra espresso from getting grounds clogging the screen
Customer
Reviewed in the United States on April 23, 2025
I’m really happy with these Puck Screens as they allow me to make espresso more easily without having to precisely measure the beans beforehand. My 51mm puck screen fit exactly into my 51mm portafilter.Normally, if you ground too few beans beforehand, the portafilter wouldn’t be completely full and this would affect brewing. By placing this puck over the beans, the problems with the air gap are taken care off, and the espresso will brew more easily. I like that it comes with a small magnet; this is used to pick up the puck screen after brewing.
John
Reviewed in the United States on April 21, 2025
I love the fact that you can pick them up with a magnet after extraction (aemmmm, but what kind of stainless is magnetic) bu these are a lot thinner than the regular puck screens I am used to...(see pics). Having said that, they seem to be working fine for more even extraction, reducing channeling
Recommended Products