Your cart is empty.
Your cart is empty.1.5 OZ Injector for plastisol !!! This model does not have a spout that falls out or can be removed !!! Plastisol residues are removed through the cap at the top of the syringe, it is unscrewed. Plastic injector has a standard 5/8" (16 mm) nozzle diameter, which is compatible with most engineered stone or aluminum bait moIds. Piston have a rubber sealing o-ring to prevent plastisol (soft plastic) from leaking. When using this injector please be sure to wear gloves since injector gets hot from the plastisol inside The primary usage of this injector is to cast fishing injection bait moIds with hot plastisol (soft plastic) to create DIY baits. Attention: Pull the handle up very strongly before use, as the grease hardens in the cold The tongs in the photo are not included in this kit and are shown as an example (you can use a pencil or stick) REMEMBER the injector gets hot when plastisol is inside, use protective clothing like gloves, long sleeves, pants, and closed toe shoes (no sandals) when pouring hot Luresol. Wear appropriate safety goggles and provide adequate ventilation in your work space too (either a fan or personal respirator)
Nathan Boyer
Reviewed in the United States on March 27, 2025
It melted on the first use.
Customer
Reviewed in the United States on February 7, 2025
Works great 👍
Trina
Reviewed in the United States on January 23, 2025
It works good but u need a thermometer with it because it has to be a certain degree so the lures don't bubble
Cassidy Morgan
Reviewed in the United States on January 16, 2025
Small, but good injector. Easier to clean out than I originally thought.
Dan
Reviewed in the United States on September 5, 2024
This injector is the best injector to use with the mold available from the same company - I own four molds, and they are excellent. The injector is very comfortable to use and can be disassembled to clean. Every item from this company is of high quality and performs well.
james bell
Reviewed in the United States on December 16, 2024
Arrived on time and was as described
TwoHands
Reviewed in the United States on November 24, 2024
I am new to making soft plastic baits so I don't have many molds and the molds I do have are pretty low capacity, maybe two or three baits at a time. For small molds this injector works just fine. You don't need a giant aluminum deal for just a few baits. Even if you do have bigger better injectors you only use part of the capacity with a small mold so a small injector like this that's easy to clean is really handy. You gotta have one at least to try it and you'll find yourself using it more often with small molds. If you are just getting started this injector will be fine until you have enough large molds that you need something bigger and then it's time to invest in a larger aluminum injector.
Jordan
Reviewed in the United States on November 12, 2024
Seems pretty light weight but so far it’s holding up. Works good for making soft plastics. Fill it up and pump it in, simple as that. I would recommend.
Recommended Products
$16.21
$ 6 .99 $6.99