Your cart is empty.
Your cart is empty.
Why Choose Us?
All In One drip irrigation faucet set, includes connect to water, maintain optimal system water pressure, and prevent backflow, no assembly required, easy to use.
Package Include:
1 X Mesh Filter
1 X Backflow Preventer
1 X Pressure Regulator
1 X 1/2" Tubing Adapter
J and W
Reviewed in the United States on May 9, 2025
Great adapter for an irrigation system. This tightens really well and doesn’t not leak.
JP
Reviewed in the United States on May 6, 2025
I use reclaimed water, and there may be grit or the like in the incoming water, so this filter is a necessity to keep emitters from plugging up. It works fine, and there are no leaks, although I would like to be able to adjust the pressure up a bit (to 20 psi) for some of the spray emitters.
DFL
Reviewed in the United States on May 2, 2025
I made a mistake ordering this pressure regulator. It'll probably work fine with mister or drip heads, but the pressure output is too low for the vortex emitters I'm using. That being said that was my fault. The regulator is well built, easy to install, and works as it should when I tested it. The brass backflow preventer works too and has a garden hose thread output, so I used it on one of our hose bibs. It's a good regulator, just not what I needed.
Michael Franklin
Reviewed in the United States on May 11, 2025
Excellent Value!We have over 1080 feet of drip tubing in our 51 total Raised Beds garden. As many have, we started out with Drip TAPE a few Seasons ago, and had the normal issues with it; Emitters dripping too slow, leakes with many fittings, etc.We decided to replace the Drip TAPE with 1/4" Drip TUBING and add small above ground 1/4" fitting Spray Heads to the systems as well.Our garden sits on the South end of our property, split by our driveway, getting full sun for 8+ hours daily, so we must maintain near constant irrigation during the hot months of North Florida heat.We have 36 Zones on our system in order to water crops according to their needs and the irrigation to the beds is on centralized systems that are attached to a plywood panel. Each of these panels contain our inlet hose, 18 timers, 18 "Y" filters and 18 REGULATORS.When we changed to 1/4" Drip Tubing, the pressure requirements for each individual zone.With the Tubing, 15psi is perfect for our fittings and for the length of our runs. When we made the change, we started shopping for decent 15psi regulators. The 8psi regulators we had been using were $20 each for the same brand in 15psi.We decided to try these in the 4 Pack, priced @ $5 less than the regulators we had been using, but had an extra "bonus" for us. That is, these regulators are built in to the Hose to Main Drip Line connector. No need to buy the extra fitting so that they securely attach to the "Y" filters.We subsequently purchased 9 more (4) packs and are on our second Season with them. They are well built, durable and deliver thr precise pressure that we need for our massive setup that we have.I highly recommend Drip Tubing over Drip Tape with these Excellent Regulators as companions!!
SH
Reviewed in the United States on March 5, 2025
If you're going to do drip irrigation, this has all the parts needed for connection at the faucet. The backflow preventer is a hefty piece of brass with a filter washer included. The pressure regulator and hose adapter are ABS plastic, and look and feel like they are well constructed. This hooks up to the average 3/4" faucet or garden hose and allows you to attach 1/2" drip irrigation mainline to feed your drip system. It's got more weight to it than I expected and doesn't feel as cheap as what's available at the local big box store. It's nice to have it all come together instead of having to get it piecemeal. I've got at least another month before it's really safe to hook up the water system, but this looks and feels like a solid start to redoing my drip system this year.
H.T.
Reviewed in the United States on March 3, 2025
I have a set of drip system that you put on the outdoor faucet for drips but it’s much much bigger than this. This is all set in this one compact set and it comes installed. You don’t need to install anything except putting it on the outdoor faucet and hose for drips. I’m not an experience installer for this and I just know as someone who just does a little gardening in my own backyard. The one I had , I had to go Home Depot and buy individually and to install it together. This is perfect makes it convenient for gardeners like me. I have seen some that is more expensive and this one has a really competitive price. This can’t be installed with a regular hose. It has to be installed with hoses that’s for drips. The quality of the brass connector is really nice and also has a little screw just so it can be tighter. So far, there’s no leaks and works great.
Joseph
Reviewed in the United States on March 13, 2025
I used this drip irrigation adapter kit to convert a typical 3/4" water hose into 1/2" irrigation tubing. It worked just as it was supposed to. We were able to get the irrigation set up for my bed of strawberry plants and this worked as intended, it had no leaks, no problems. So far I am happy with the quality of this item.
Steven
Reviewed in the United States on April 18, 2025
Looked great installed it worked great totally impressed purchased two.
Recommended Products
