Ring Sizers for Loose Rings, Ring Guard Tightener Invisible Curable Adhesive with UV LED Lamp, Ring Resizer Glue

Vereclue innovative ring size adjuster
This innovative ring adjuster is designed to provide a perfect, snug fit for your rings, preventing them from sliding off or spinning around your finger. The ring sizers adjuster for loose rings is suitable for rings of all shapes. With our innovative design, you can enjoy a tailored fit for every ring in your collection, promoting both comfort and confidence. The ring adjuster adhesive is made of high-quality resin, colorless and transparent, and will not fall off after long-term use, and will not yellow or age. It also functions as an adjustable ring guard, preventing open-ended rings from snagging on hair or clothing, providing additional safety and convenience for uniquely designed rings. This is the ultimate solution to achieve a perfect fit without sacrificing style or comfort.
Universal Fit
Ring resize is suitable for rings of various shapes and sizes, and the thickness of the glue can be customized to ensure that each ring is firmly worn on your finger.
Invisible and beautiful
Compared with the characteristics of traditional gaskets that are prone to yellowing and aging, the ring tightener glue is not easy to age, and the glue is transparent after curing, which is truly invisible, beautiful and comfortable to wear.
Not easy to fall off
Traditional adjusters tend to age after long-term use and need to be replaced frequently. Our ring spacer is long-lasting and not easy to fall off, saving time and effort.
Easy to use
The glue is easy to apply, and the micro-pinhole design allows you to control the amount of glue and apply it accurately, making it messy. Just apply glue to the inner ring and shine it with a professional light for 120 seconds, and you'll get a perfectly-fitted ring.
Easy to remove
Just put the ring in warm water for 5-10 minutes, and you can easily pry it open and completely remove the glue without damaging the ring.
Packing Included:
1* Ring adjuster glue,
1* UV lamp,
1* USB charging cable,
1* Assit clip,
1* User manual
INSTRUCTIONS
1. Wear the ring and observe the size that needs to be adjusted.
2. Squeeze an appropriate amount of glue onto the inner surface of the ring.
3. Slowly rotate the ring to ensure that the glue is evenly distributed and improve wearing comfort.
4. Fix the ring to the ring holder, and be careful to avoid the ring holder from contacting the glue to prevent affecting the shape of the glue after curing.
5. Use the UV lamp to irradiate for 120 seconds. Press the UV lamp to irradiate for 60 seconds at a time, or press and hold for 3 seconds to irradiate for 120 seconds. Then wipe off the excess glue.
6. If there is too much or too thick glue, the UV lamp exposure time should be extended to ensure that the glue is fully cured.
7. If the ring that needs to be adjusted is significantly larger (usually more than 1mm (40mil)), apply the adhesive in 2-3 times and repeat steps 1-5.
8. After curing, rinse with alcohol wipes or water to remove any uncured material on the surface.
NOTICE
1. Our UV light is no harmful to eyes! But Avoidcontinuous staring or shining on others to avoid discomfort.
2. This glue is made of resin and is harmless to the skin. Discontinue use if skin allergy or dermatitis occurs during use.
3. This adhesive poses no harm to the environment after curing, as it forms a typical polymer with no environmental hazards.
4. Please tighten the bottle cap after use and store in a place away from direct sunlight and high temperature. Please wash your hands after use.
5. Store away from ignition sources, flammable, not explosive. Keep away from children when not in use.
6. In case of accidental eye contact: Lift eyelids, rinse with plenty of flowing water or saline for at least 5 minutes. Seek medical attention.
7. Disposal Precautions: Prevent waste from entering drains, do not dispose of with household waste.