Your cart is empty.
Your cart is empty.Product Description
Fast and Accurate Balancing
These blade balancers offer precise balancing for almost all types of lawnmower blades. Balancing is faster and easier with blades that have circular center holes, but our static cone blade balancers can accommodate different patterns and sizes of blade center holes, regardless of the blade’s type and the diameter of the center hole.
The blade balancers’ center pin and sturdy base also ensure accurate balancing at all times.
How to Use the Lawnmower Blade Balancer
Place the blade balancer on a level and stable surface.
Insert the blade’s center hole onto the top of the blade balancer cone
Leave the blade to balance on the blade balancer by itself.
A well-balanced lawnmower blade will stay horizontally level.
For unbalanced blades, grind down a bit of the excess material and recheck the blade balance on the balance.
Repeat Step 5 until the lawnmower blade becomes balanced.
Thisisthemayor
Reviewed in Canada on June 1, 2025
Works great
Ted
Reviewed in the United States on May 17, 2025
ok product
bradley rudi
Reviewed in the United States on March 7, 2025
True to what it is supposed to do
Evan
Reviewed in the United States on February 11, 2025
Just what I wanted. Works great
Bernie
Reviewed in the United States on January 27, 2025
Cheaply made. Very simple to use. Works with multiple styles of blades.
Watts
Reviewed in the United States on April 20, 2025
Just old school good if you want to sharpen your own lawn mower blade. works great.
D
Reviewed in Canada on September 5, 2024
Great that you get 2 in a package, but they're not very precise out of the bag. I had to smoothen out the inner cone area where the stem balanced, and point of the stem before it could balance smoothly and give accurate reading.. I used a 600 grit paper to get it mirror polished and it was moving and balancing precise after that. Don't take too much off any side of the stem tip, or it will throw off balance also.. Keep all surfaces even, but smooth as possible for most accurate balance.. Glad I got 2, as things get lost fast around here.
Ron S.
Reviewed in Canada on September 27, 2024
The product was functional enough, but why a two pack? I would rather buy one at half the price.
S. A. ROBBINS
Reviewed in the United States on September 24, 2024
I've been using one of these for years and it works great. Just set the blade centered on the tool and if the blades tilts, then it is out of balance so grind some off that end and try again.
Luciano Cugini
Reviewed in Canada on August 2, 2024
good
TD-33
Reviewed in the United States on June 14, 2024
Getting 2 at this price is great and they’re made of metal. Took 1 star off because both cones had small excess metal on the lower edges. I filed them off from both cones to ensure a balanced setup.Helpful Tips: Put a little oil on the tip of the pin, it makes the cone more responsive. If the blade hole is loose on the cone steps, happened to me. Take a small piece of paper and put it over the cone to make for a tighter / centered fit. If not the blade may / will shift more towards one side making in seem unbalanced. Hopefully this help's.
Louise
Reviewed in Canada on October 10, 2024
Très bon produit
randy ussery
Reviewed in the United States on April 18, 2024
The balancer, works very good, when you load a blade on, you mark the side thats high with a sharpie, and then as your sharpening, give the edge a couple of hits with the file or if you using a grinder, grind the edge and then rebalance, repeat until it’s level, you know you got it and it greatly reduces vibration
Recommended Products