Your cart is empty.
Your cart is empty.Product Description
You can choose 1 of the 3 methods to straighten your tubing coil
Vise mount
Roller
Handheld
Adjustment
To straighten the tubing, slowly increase the tilt angle of the front roller by turning the wing nut.
Tom R.
Reviewed in the United States on April 7, 2024
Fuel line still has waves and not completely straight. Ok for short pieces (6”) any length over that is wavy. Also tension wheel not strong enough to hold line in place.
DC
Reviewed in the United States on May 9, 2023
The only reasonably priced tool that clamps on to the tube so you can use it with lines that already have fitting on. It takes "working" the line, not just one pass, but it works well. I would recommend it.
Landon
Reviewed in the United States on January 6, 2023
Worked just as advertised... Takes a few passes but the more time you spend the straighter you can get the tube
Peter Bogus
Reviewed in the United States on January 6, 2023
A bit pricy for what it is, but it's cheaper and more complex than most on the market.It's not going to be straight with one pass through the tool, but a few passes and you get nice straight line.I'd say it doesn't do a great job with the first few inches (just the nature of the tool), but I got a 24 inch straight section of 1/4" SS line in just a few minutes.Happy to have this tool for future jobs!
Customer
Reviewed in the United States on October 5, 2022
With a little practice this tool does a pretty good job of straightening you break lines. I found that when your straightening your lines the curve needs to be down so when it passes thru the tool it straightens in an upward movement. A couple of passes is necessary.
colin mackenzie
Reviewed in the United States on March 14, 2020
Seems like a fairly well built tool. After trying to straighten 5/16" fuel line I realize that it is not really able to do the job properly. 5/16" and 3/8" fuel line are to tough for the small size of the tool to straighten. It might work on 3/16" and 1/4" brake line since they are easier to bend. I will go back to using 12" blocks of wood with the proper diameter holes to straighten coiled line.
Erika Ayule
Reviewed in the United States on December 7, 2020
Worked very good so good it got lone out three times all ready
Darin
Reviewed in the United States on December 30, 2020
Works as described described great tool cuts off a lot of time while redoing brake lines
Recommended Products