Your cart is empty.
Your cart is empty.To provide optimal fit and performance for your specific vehicle, each TYC replacement mirror is identical in design and construction to the OE part it replaces. TYC replacement mirrors meet all Federal SAE/DOT regulations and are FMVSS 111 compliant. TYC mirrors are extensively tested against common issues affecting replacement mirrors, such as excessive glass vibration on rough roads, to ensue years of hassle-free service.
fulltimesnapper
Reviewed in the United States on February 9, 2025
Product is probably fine, but description in left column states sometimes it is for heated applications, sometimes for unheated. This is for HEATED, so connector is different than for UNheated. A picture of the underside of the mirror showing a light there would have been super helpful. I had to return it.
Thomas Stephan
Reviewed in the United States on August 12, 2024
This fit 2010 Fusion Hybrid, both fasteners and electric connectors. The whole thing took 15-20 minutes. It took longer to put the door back together then take it apart. There is a good Youtube that is easy to find that was helpful. I used a T20 bit, 7mm, 8mm and 11mm sockets.
Ray
Reviewed in Canada on July 10, 2024
It fits. I was worried before making the purchase but the description is very specific. Product has no defect upon receipt, though there are no instructions, I easily got one in IYoutube.
Fits 2010 ford fusion SEL 3.0 perfectly
Reviewed in the United States on May 29, 2024
This fits 2010 ford fusion SEL 3.0 perfect and works exactly as the original
Joanne zeigler
Reviewed in the United States on December 30, 2024
The mirror did fit however the adapter was the wrong size prongs my prongs that I have for my mirror were five the prongs on the new mirror only had three prongs so I have to move it with my hand instead of using it electronically
W. Hickey
Reviewed in Canada on October 14, 2021
Deer took off driver side mirror on 2010 Ford Fusion Sport, ordered this, delivered within 2 days.Watched one 5 minute YouTube video and was able to install it immediately after with no real problems.Only issues are: 1) couple clips on the plastic face plate broke as I was trying to snap it onto the installed mirror. My own fault for not lining it up perfectly.2) the mirror doesn't include blindside sensors so missing that functionality with the Fusion Sport, otherwise it has underside light, heated mirror and electric adjustmentWould definitely recommend and buy again if needed.
Customer
Reviewed in Canada on December 10, 2020
2010 Ford Fusion SEL. This unit is heated power mirror with puddle light. It fit very well on my car and installation was easy.You do need to remove the interior door panel so be prepared. Popping the clips is kinda hard and they break easily when the car is cold (winter) so might be best to do it once the car's been driving for 15min. You need a T20 screw driver, 7mm socket, and 11mm socket. Flat head screw driver and panel pry tool are likely necessary but that's up to you.
Andrea BL
Reviewed in Canada on May 9, 2019
Fit my 2010 fusion perfectly. Was even able to out my old colour plate on it.
Griffin
Reviewed in the United States on August 30, 2018
2009 Fusion SEL, it fits well. 3 screw to remove your door panel, pop the speaker, and you have all the access you need. I would clean under the broken mirror well, line up your pins, and clasp, and tighten the nuts. The fit is pretty decent. The padding is thicker than the OEM, and will likely require increased tightening in a couple of days, but it looks great. Be careful removing your old paint matched cover (if you kept it), and snap it on. The kit does come with a black shiny one in case you broke your old one. You could paint match it, but, the QC on the cover isn't all that great. The release points from the injection marks are pretty worn out, and the edges a bit rough for immediate use, but I am just being a pain. Great price, amazing shipping, and just what I needed.
Dave
Reviewed in the United States on May 1, 2017
I caught my old mirror on the side of my garage when I was backing out and this was the perfect replacement for my 2007 Mercury Milan Premier. This one does have the puddle light underneath which is good and my car is black so it matched great. It was also really easy to install myself - I just had to look up some YouTube videos and get the right tools. You'll just need an upholstery remover, Phillips and flat head screwdrivers and some socket wrenches.
Customer
Reviewed in Canada on November 7, 2016
The mirror on this is not very clear, unlike the original part that came with it.Otherwise great buy.
Greg J
Reviewed in the United States on August 27, 2015
Arrived on time in minimal yet sturdy packaging. Installation took about 15 minutes. It fit very well on my 2006 Ford Fusion with only a very slight gap between the top of the mirror and the car. Electrical connection was easily and snugly snapped into the existing wiring. Mirror direction, puddle lamp and defroster all worked like the original. The mirror shipped with a separate black cap but I utilized the cap from the old mirror to match the color of my other mirror. It too snapped in easily with a perfect fit. This was an advantage over other similar mirrors that did not include a separate cap in that I could choose between the two to best fit my needs. Price including shipping is 50% less than using a Ford branded mirror. Amazon had great pricing compared to other vendors.
DD
Reviewed in the United States on March 19, 2012
Paid for overnight delivery and it arrived as required. Fit pretty well although a small gap remained to sheet metal on the top side. Saved $200 even with overnight shipping compared to body shop. Took 10 minutes to install. Front cover arrives as a separate piece so you can paint it body color...my car was black, so the shiney black molded color matched perfectly. Mirror surface has a few very minor wobbles in the surface, but for the price savings for a 6 year old car, who cares.
Recommended Products
