Your cart is empty.
Your cart is empty.Product Description
Customer Review
Reviewed in the United States on June 9, 2025
This is a nice addition to my DWS780 Dewalt miter saw. It's not anything amazing, probably something one could make on their own. But at this price point, it's good enough quality and one less thing to distract one from doing the actual woodworking you want to do.Had no problem hooking it up to the saw. There is plenty of adjustment in the saw to get whatever gap you would like.
Meditelli
Reviewed in the United States on June 7, 2025
Making a zero clearance fence is a cool little project for a lot of people, but I couldn’t be bothered so I bought this one. It’s a good quality fence, good design and fits my Dewalt precisely as it should. Bonus points for including all the hardware needed to mount it. Extra bonus points for minimal packaging. Final bonus points for being made in the USA. I took away half a star because all the edges are splintery and not sanded. I sanded them off myself in about five minutes. It’s definitely not a dealbreaker and maybe I’m being finicky but they could’ve sanded a huge stack of these in about five minutes and I wish they would have, then they’d have a nice polished product and it would’ve earned them five stars. Still yet, fussiness aside, a nice product. Recommended
pinnerman08
Reviewed in the United States on June 7, 2025
I just installed this Zero Clearance Fence on my Dewalt saw. It was actually very easy to install too. This will let me make much better and smoother cuts. The fence is made from wood, so it is very solid. This fence is made specifically for my Dewalt, so everything lines up perfectly.
UE
Reviewed in the United States on June 6, 2025
This is not something a pro woodworker needs. It’s 2 pieces of 1/2” plywood pre-drilled for the saws it says. If you have the 20v Max 7 1/4 saw it won’t fit as is but you can cut it down. Being that you’re putting it against your guide, it should be thinner. I don’t understand the need for a 1/2” that offsets your material by that too so you’re gonna lose that much cutting depth. And the back is raw unfinished wood. It doesn’t even have the white veneer like the front. This looks like it’s at best out of someone’s home shop and I would not get this again.
T.Goodrich
Reviewed in the United States on June 6, 2025
I got this for my DWS779 and it fits perfectly. The fence is pretty nice and installs easily but I had to take a rating star off due to mine arriving with several digs and dents in both pieces. This likely will not effect the functionality of the fence but still. After installation which is easy as installing 4 provided screws, nuts, and washers, I checked for squareness with the saw bed and found it ranged from a perfect 90 degrees to 89.8 degrees in some places.A couple of things to note and be aware of:1. The listing says the fences are made from MDF however they are clearly lamented plywood.2. It does make it hard to swing around the saw's side clamp.3. Because the saw's fence's have natural play in them, you will need to spend a little time lining up these fences with your blade everytime you move the fences. Otherwise the add-on fences can run out of parallel with the blade a bit more than a whisker and you risk cutting them.4. These will make it harder to slide your fences.Overall even despite the dings and the things to be aware of, I like these fence's and their benefits.
D. Beahn
Reviewed in the United States on June 4, 2025
Look, as a woodworker, this is a product that I could have easily made myself. For $25 it was worth it to buy it and spend my time making other things. Fits well, slides easily, and looks great. You will spend more time adjusting the back fence so you can get that "zero gap" fit for your cuts - which is OK since that's the point: you don't need a miter version, straight version, and bevel version. The one will adjust to do all of them.
NoName
Reviewed in the United States on June 13, 2025
This arrived without the hardware that was supposed to be included.
Traveling Light
Reviewed in the United States on June 12, 2025
For starters, this is very easy to install; four screws and you’re done. And it fits my Dewalt miter saw just fine. It isn’t fancy and is made of manufactured wood but seems solid enough. I had to sand the edges as they were rough and it made me crazy. The edges of any tool or jig made from wood should be smooth!The tool offers extra possibilities, especially when cutting really wide crown molding. And in some cases it should help reduce splintering by using the close tolerance of the inner edges of the modified fence. It will take me some time to try it out more and see just how much benefit I can get from it. But for now I believe it can add some versatility to my Dewalt DWS780 and possibly make some cuts a little safer. I’m always for ANYTHING that will make the shop a safer place (I’m old and would like to finish my life with all of my fingers intact).For the materials used to make it, I can’t say I think it is a great value. But it isn’t terribly expensive and may offer enough benefits to justify the cost.Honestly, it doesn’t thrill me but I will give it a try and attempt to come back later and report on what I discover.I recommend it.Take time to experiment with new gear WITH THE POWER TURNED OFF! Learn what will fit where and avoid unhappy surprises. Stay safe!
Recommended Products